Available in MMU (Multiple Meter Unit) enclosures containing up to 24 meters in one compact enclosure (MMU Cabinet Sold Seperatly)
Patented 0-2 volt output split-core current sensors promote enhanced safety and accurate remote mounting of current sensors up to 2,000 feet from the meter without power interruption
(Optional solid-core current sensors available in 100 & 200 A)
Onboard installation diagnostics & verification system
Parallel up to three (3) sets of current sensors for cumulative reading
Meter can be used on the following configurations:
3-Phase, 4-Wire
3-Phase, 3-Wire
2-Phase, 3-Wire
For other configurations contact factory
Fixed-value pulse output
Industrial grade JIC steel enclosure (standard) with padlocking hasp & mounting flanges for indoor installation
Knockouts: 1 1/16" (3/4" cond.) bottom, 7/8" (1/2" cond.) top
Optional NEMA 4X polycarbonate enclosure with padlocking hasp & mounting flanges for indoor/outdoor installation (stand alone) with one 1 1/16" KO on bottom of enclosure
Non-volatile Memory
UL/CUL listed
Revenue Grade Accuracy: Certified by independent test lab to ANSI C12.20 national accuracy standards (+/- 0.2% from 1% to 100% of rated load)
California CTEP approved for use with solid-core current sensors (listed by the California Energy Commission)
New York City approved and Con Edison approved for the RSP program
The E20-600400-R-KIT is a Class 2000 Meter, 600V, 400A, NEMA 4X Enclosure, Pulse Output, 3 Split-Core Current Sensors with 2V Output.
The E-Mon D-Mon Class 2000 three-phase kWh meters are fully electronic low cost meters for monitoring electrical usage in commercial, industrial or institutional facilities. E-Mon's patented 0-2 volt output split-core current sensors allow for quick and safe installation without power interruption. These sensors also allow for meters to be remotely located up to 2,000 feet from the electrical panel they are monitoring. Multiple sets of sensors can be installed on one meter to provide cumulative usage readings for multiple loads.
E-Mon D-Mon Class 2000 Series meters can be supplied in compact MMU Multiple Meter Units for installations where space is at a premium. These meters can also be interfaced with RightEnergy™ software for a complete energy intelligence system monitoring not only Class 2000 meters, but any style E-Mon D-Mon meter or other electric, gas, water and steam meters.
The E-Mon D-Mon Class 2000 kWh meter is a 3-element meter used to monitor electric power usage of individual loads after the utility meter. The E-mon Demon Class 2000 meters labeled for 120/208V service MUST NOT be installed on service feeds of 277/480V and vice versa.
