This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
E-Mon P3-PULSER
P3 Pulser Interface
P3PULSER
P3-PULSER
- The E-Mon D-Mon P3 Pulser is an optically coupled interface device that allows E-Mon D-Mon Class 1000 & Class 2000 kWh & kWh/Demand meters to be connected to an energy management (EMS) or building automation system (BAS) for data-gathering and/or load control
- The pulse width and value are selected by 2 DIP switches and can be tailored to fit your specific requirements in the field
- A modular plug connects the pulser to the E-Mon D-Mon meter; a two-screw terminal provides easy connection to the EMS/BAS
- An LED on the pulser shows the rate and duration of the pulse
- The pulser has an operating range of 1.5 to 36 volts AC or DC (supplied by the EMS/BAS)
- Applications include:
- Tenant billing, based on both kilowatt hour (kWh) and kilowatt (kW) demand information from the E-Mon D-Mon meters through the pulser's real-time demand reading, allowing the user to see the effects of loads as they come on or off-line
- Automatic load/shedding/limiting by the EMS to lower usage and costs
The P3-PULSER is a P-3 PULSER INTERFACE. The E-Mon D-Mon P3 Pulser is an optically/coupled interface device that allows the Class 10000 or Class 20000 kWh or kWh/Demand meter to be connected to an energy/building management system (EMS) for the purpose of data-gathering and/or load control. The pulse width and value are selected using 2 DIP switches, and can be tailored to fit your specific requirements in the field. A modular plug connects the pulser to the E-Mon D-Mon meter; a two-screw terminal provides easy connection to the EMS. A LED on the pulser shows the rate and duration of the pulse. The pulser has an operating range of 4.5 to 28 volts dc (supplied by the EMS).
| Vendor Alias | E10055 |
|---|---|
| UPC | 781798015697 |
| Brand | E-Mon D-mon |
| Condition | NEW |
