The RIDGID RP 340 (44483) Standard Press Tool Only (No Battery or Jaws) is designed to mechanically press fittings onto tubing to create a water-tight and permanent seal. The RP 340 has a 4" pipe and tubing capacity and weighs only 8.3 lbs. (with battery, sold separately). It features a 180° rotating swivel barrel, perfect for getting at hard-to-reach connections. An available 18V Advanced Lithium 4 battery (sold separately) helps the RP 340 achieve as much as 400 presses per charge, and it has an industry-leading service interval of 42,000 cycles. An optional AC power adapter (sold separately) can further maximize uptime job site to job site.

When the switch on the RP 340 is depressed, an internal electric motor powers a hydraulic pump, which forces fluid into the cylinder of the tool, moving the ram forward and applying thousands of pounds of pressing force onto specially designed fittings. The entire cycle duration is approximately five seconds. Once the cycle begins to deform a fitting, it will automatically continue until completion, even if the trigger switch is released. The LED displays on the top of the tool indicate problems such as improper temperature, open jaw mounting pin or maintenance required.

The RP 340 Press Tool is equipped with a bright LED that lights up when the trigger is pulled and remains lit four minutes after the trigger is released. This allows the user to easily illuminate the work area.