Digital Voltage Indicator with Capacitive Test Point Mode Kit, 100V to 99kV, 60Hz, with Overhead Hook Probe, Underground Bushing Probe, Proof Tester
52074188
DVI-100T/K02
52074188
The Greenlee DVI-100T/K02 (52074188) is a Digital Voltage Indicator with Capacitive Test Point Mode Kit, Overhead Hook Probe, Underground Bushing Probe, and Proof Tester. The DVI-100T indicates voltage from 0.1kV to 99kV. Capacitive test point mode indicates voltages on elbow test points. It has a 2.25" LED display, 2-digit readout and audible alarm.
Compact, rugged polycarbonate housing
Auto-ranging with no range selector switch or settings required
The Greenlee DVI-100T/K02 (52074188) Digital Voltage Indicator with Capacitive Test Point Mode Kit, 100V to 99kV, Overhead Hook Probe, Underground Bushing Probe, and Proof Tester, is designed to be used on distribution systems in both overhead and underground applications and on transmission systems up to 161kV. The DVI-100T indicates voltage from 0.1kV to 99kV and is auto-ranging; it also features a capacitive test point mode, allowing it to be used in underground applications to indicate voltages on elbow test points.
The DVI-100T displays voltage on a large 2.25 in. LED display with a 2-digit readout. In addition, an audible alarm alerts the user to the presence of voltage above 100VAC.
The DVI-100T is very easy to use, since there are no range selector switches or settings to be made - simply contact the conductor and read the display. The DVI furthermore features an auto shut-off function and will turn off after 3-4 minutes of inactivity.
A 2 in. overhead hook probe (HP-DVI-2) is supplied with the DVI-100T/K02. The kit also includes an underground probe (IEP-DVI-5) for underground or pad mount applications, or for any application up to 21kV line-to-ground where the DVI will be used in close proximity to grounded conductors or surfaces. Use of a hotstick (sold separately) is required for all overhead and underground applications.
The DVI-100T/K02 Kit includes the PT-DVI Proof Tester, which generates high voltage AC for testing the DVI. It should be used before and after each use to verify proper operation of the voltage indicator.
