True-RMS Electrical Tester with FieldSense Technology, 1000V, 200A
T61000PRO
T6-1000 PRO
The Fluke T6-1000 PRO is a True-RMS Electrical Tester that measures with FieldSense Technology and current, all through the open fork and without test lead contact to live voltage. The T6-1000 PRO works with most wires up to AWG 4/0 (120 mm2), carrying as much as 200A and 1000V AC.
Simultaneously displays voltage and current measurements
FieldSense technology measures AC voltage, current and frequency without making electrical contact to live voltage
This product is available for shipping to the US, Canada, and Puerto Rico only.
The Fluke T6-1000 PRO True-RMS Electrical Tester measures voltage up to 1000V AC and current up to 200A AC, all through the open fork and without test lead contact to live voltage. Connect the black lead to ground with the included heavy-duty alligator clip, slide the wire into the open fork and see both voltage and current at the same time. The T6-1000 PRO works with most wires up to AWG 4/0 (120 mm2), carrying as much as 200A and 1000V AC. It can even be used with gloves on. The electrical tester will change how you do your job.
The T6-1000 PRO allows electricians to test where it used to be impossible. Instead of pulling wire nuts, just slide the open jaw over a single conductor. This is much faster and safer than working to find a metallic contact point. Plus, voltage and current measurements can be made at the same time. The T6-1000 PRO measures and displays both voltage and current at the same time, simply by sliding the open jaw over the conductor.
The T6-1000 PRO is equipped with Fluke FieldSense technology, which is a proprietary method of measuring the actual voltage value without making live electrical contact. Unlike other non-contact voltage testers and detectors, the T6-1000 PRO uses FieldSense technology to provide an actual voltage measurement. Users get measurements that are more reliable and more accurate than existing go/no-go testers.
Not having to probe live conductors also makes jobs safer. Since there is no need to make electrical contact, the chance of human contact with an energized wire is greatly reduced. This also reduces the chance of making contact with the wrong conductor, which can produce unexpected results.
The T6-1000 PRO is especially designed for electricians working in potentially dangerous environments. Since users will almost always be wearing gloves or other PPE, the T6-1000 PRO is designed to use an external ground clip 100% of the time. In addition, the area where FieldSense technology measures voltage is extended further down the open fork. This means getting consistent, accurate voltage and current measurements without touching a live wire is easier than ever before.
