Fluke Calibration 9100S/725-KIT

Name: Fluke Calibration 9100S/725-KIT Dry-Well and Process Calibrator Bundle
Brand: Fluke Calibration
SKU: 9100S725KIT
Price: 4895.0 USD
Availability: InStock

Our Part No. 9100S725KIT

Mfr. Model 9100S/725-KIT

Catalog No. 4550143

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Fluke Calibration 9100S/725-KIT

Our Part No. 9100S725KIT

Mfr. Model 9100S/725-KIT

Catalog No. 4550143

9100S
Temperature range: 35°C to 375°C (95°F to 707°F)
Accuracy: ±0.25°C at 50°C; ±0.25°C at 100°C; ±0.5°C at 375°C

This product is available for shipping to the US, Canada, and Puerto Rico only.

Datasheet

Replaced with:

Fluke Calibration 9100S-A-156

Key Features

9100S
Temperature range: 35°C to 375°C (95°F to 707°F)
Accuracy: ±0.25°C at 50°C; ±0.25°C at 100°C; ±0.5°C at 375°C
Stability: ±0.07°C at 50°C; ±0.1°C at 100°C; ±0.3°C at 375°C
Rapid heating and cooling
Prop stand
RS-232 interface capability
Temperature scan rate control
Eight set-point memory
Adjustable readout in °C or °F
725
Small, streamlined shape
Rugged, reliable design stands up to field use
Easy to read measure/source screen lets you view input and output simultaneously
Measure volts, mA, RTDs, thermocouples, frequency and ohms
Test sensors and transmitters
Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Support flow meter testing with frequency and CPM functions
Perform fast linearity tests with auto-step and auto-ramp features
Power transmitters during test using loop supply with simultaneous mA measurement
Handle fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms

Details

The Fluke Calibration 9100S725KIT Dry-Well and Process Calibrator Bundle includes the 9100S Handheld Dry-Well Temperature Calibrator, which may be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. This instrument is small enough to use in the field, and accurate enough to use in the lab. Calibrations may be done over a range of 35°C to 375°C (95°F to 707°F). Temperature display and setability resolution is 0.1 degrees.

The temperature is accurately controlled by Fluke's digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a triac driven heater.

The Fluke Calibration 9100S-A-156 LED front panel continuously shows the current well temperature. The temperature may be set, using the control buttons, to any desired temperature within the instrument's range. Multiple fault protection devices insure user and instrument safety and protection.

The Fluke Calibration 9100S/725-KIT also includes the 725 Multifunction Process Calibrator, which can test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency and ohms. From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls (without menus), make operation easy.

More Information