This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
E-Mon E50-208200-R01KIT-NS
Class 5000 Smart Meter with NEMA 4X Enclosure, EZ-7 and EZ-7 Ethernet Protocols (No Current Sensors), 120/208-240V, 200A
E50208200R01KITNS
E50-208200-R01KIT-NS
E-Mon E50-208200-R01KIT-NS
Class 5000 Smart Meter with NEMA 4X Enclosure, EZ-7 and EZ-7 Ethernet Protocols (No Current Sensors), 120/208-240V, 200A
E50208200R01KITNS
E50-208200-R01KIT-NS
The E-Mon D-Mon E50-208200-R01KIT-NS is a Class 5000 Smart Meter with NEMA 4X Enclosure (No Current Sensors) that features advanced dual protocol communications. It can monitor the electric power usage of individual loads of utility meters, and stores kW and kVAR data for automatic meter readings.
- Current: 200 Amp
- Frequency: 50 Hz
- Number of phases: 3-Phase
- Voltage: 120/208 to 240 Volt
- Current: 200 Amp
- Frequency: 50 Hz
- Number of phases: 3-Phase
- Voltage: 120/208 to 240 Volt
- Advanced 4-line display showing:
- kWh
- kW demand (with peak date and time)
- Power factor per phase
- Real-time load in kW
- Amps per Phase
- Volts per phase
- On-board set-up option for: IP address; Meter date/time; ID codes for EZ7, Modbus and BACnet
- Onboard installation diagnostics and verification system
- Two external meter inputs (water, gas, BTU, etc.) Channels 5 and 6
- Pulse count registers not visible on LCD display may be read via E-Mon Energy, BACnet, or Modbus front end
- Two pulse outputs
- Phase loss alarm. (N.O. Contact)
- Built-in RS-485 EZ 7 communication capability supports following connection configurations (or combinations not to exceed 52 devices per channel):
- Up to 52 Din-Mon D2 and D5, Class 3200, 3400 and 5000 meters and/or IDR interval data recorders
- Cabling is daisy chain configuration, 3-cond., 22 AWG, up to 4,000 cable ft total per channel
- Communications: Built-in RS-485 and Ethernet
- Protocols: EZ7
- Records kWh and kVARh delivered, kWh and kVARh received in first four channels
- Data stored in 15-minute intervals for up to 72 days or 5-minute intervals for up to 24 days
- Maintains data in a first in, first-out format
- Compatible with E-Mon Energy software via EZ7 protocol for automatic meter reading, energy billing and profiling
- Meter is designed for use on both 3-phase, 3-wire (delta) and 3-phase, 4-wire (wye) circuits
- Outdoor NEMA 4X polycarbonate enclosure (standard) with padlocking hasp and mounting flanges for indoor/outdoor installation (stand alone) with one 1-1/16 in. (3/4 in.) KO on bottom of enclosure
- UL/CUL listed. Meets or exceeds ANSI C12.20 national accuracy standards (+/- 0.2% from 1% to 100% of rated load)
- CE Mark approved
- Meter meets or exceeds MID accuracy standards
- BACnet protocol is BTL certified
- LonWorks protocol is LonMark certified
The E-Mon D-Mon E50-208200-R01KIT-NS Class 5000 Smart Meter with NEMA 4X Enclosure (No Current Sensors) features advanced dual protocol communications, enabling simultaneous communication with BAS systems energy monitoring, and billing programs and/or M&V reporting tools. This device is used to monitor the electric power usage of individual loads of utility meters, and stores kW and kVAR data for automatic meter readings. It features an advanced 4-line large display, as well as EZ27/RS485 and EZ27/Ethernet communications.
| Brand | E-Mon D-mon |
|---|---|
| Condition | NEW |
- 1 - Class 5000 Smart Meter with NEMA 4X Enclosure, 120/208-240V, 200A (E50-208200-R01KIT-NS)
