DIGI-SENSE WD-89800-11

Name: Digi-Sense WD-89800-11 TC9100 Single-Loop Benchtop Temperature Controller for Thermocouples, Advanced PID, On/Off Control
Brand: DIGI-SENSE
SKU: WD8980011
Price: 1312.0 USD
Availability: InStock

Our Part No. WD8980011

Mfr. Model WD-89800-11

Catalog No. 89800-11

Skip to the end of the images gallery

Skip to the beginning of the images gallery

DIGI-SENSE WD-89800-11

Our Part No. WD8980011

Mfr. Model WD-89800-11

Catalog No. 89800-11

The Digi-Sense WD-89800-11 is a Single-Loop Benchtop Temperature Controller for Thermocouples. The microprocessor control uses a PID algorithm to provide precise heating/cooling tolerances. The auto-tuning function allows automatic configuration of PID parameters. The single thermocouple input accepts J, K, N, R, S, T, B and E sensors.

Front panel indicates output and alarm conditions
Grid support bracket ideal for fume hood mounting

$1,176.09 Price $1,312.00

This item ships FREE

Key Features

Simple on/off control to sophisticated auto-tuning PID control
Simultaneous view measured value and set point on two-line display
Front panel indicates output and alarm conditions
Grid support bracket ideal for fume hood mounting
Thermocouple (grounded or non-grounded)
Automatic cold junction compensation and break protection for sensor
Calibration Accuracy

Types J, K, T, E, N: +/- 0.1% of span of +/- 1 C
Types B, R, S: +/- 0.2% of span

Details

The Digi-Sense 89800-11 TC9100 Advanced PID and On/Off Temperature Controller is designed to regulate a user-defined output device at a set point temperature. The microprocessor control uses a PID algorithm that provides precise heating/cooling tolerances for demanding applications in the laboratory or industrial setting.

The TC9100 is a microprocessor-based, digital indicating, single-loop temperature controller. It has a single output located on the back of the controller. It features an auto-tuning function that allows automatic configuration of the PID parameters with minimum user configuration required. The TC9100 has a single thermocouple input that accepts J, K, N, R, S, T, B, and E sensors.

The controller automatically sets the PID parameters through a "learning" sequence in the auto tune mode. PID parameters include proportional band, reset/integral, and rate/derivative. The user-friendly LED display is to aid in monitoring and setup of the controller. The controller automatically stores all user-defined information in non-volatile memory.

More Information