This site uses cookies to provide an optimized shopping experience. By using this site, you agree the use of cookies within our privacy policy.
Desco 19325
Single Workstation Continuous Monitor, 120VAC with North American Plug
19325
19325
- Single workstation continuous monitor
- Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface and the electrical ground of the electrical receptacle used to power the monitor
- Single workstation continuous monitor
- Continuously monitors the path-to-ground integrity of one operator, one ESD worksurface and the electrical ground of the electrical receptacle used to power the monitor
- Wave Distortion Technology provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground and the presence of its 1 megohm safety resistor
- Park Snap allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
- Single-Wire impedance design
- Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
- 1.2 volt operator test voltage reduces the risk of electrical overstress (EOS) for the handling of sensitive components
- <50 millisecond alarm response time identifies failures and intermittencies that inferior technologies miss
- Illuminates green to indicate proper grounding
- Illuminates red and sounds audible alarm when intermittent or failed connection occurs
- NIST Calibrated with certificate included
- 120VAC input rating with North American power cord
- Works with standard electrical systems in North America and Japan
The Desco 19325 Single Workstation Continuous Monitor, 120VAC with North American Plug provides 100% monitoring of both the operator and the work surface. This unit provides continuous monitoring of: One user wearing a wrist strap, ESD worksurface, Ground, and AC outlet. The wave distortion circuitry monitors current/voltage phase shifts and provides true 100% continuous monitoring.
Condition | NEW |
---|---|
Brand | Desco |
Vendor Alias | 19325 |
- 1 - Power Cord
- 1 - Mat Monitor Cord (Black)
- 1 - Ground Cord (Green and Yellow)
- 2 - Countersunk Washers
- 2 - Flat Head Screws, 6-32 x 1/4"
- 1 - Hook and Loop Fastener Strip
- 1 - Certificate of Calibration