Mini SNG

The trends in electronic news gathering are constantly changing. The trucks used in this industry are changing as well. Today's SNG/ENG environment calls for faster, lighter, and less expensive vehicles to perform satellite operations. Traditional full size vans, Sprinters, and other large trucks are now being replaced with SUVs, minivans, and even small hybrid station wagons! This puts additional pressure on the engineer to be able to utilize all the gear needed to effectively do the job. This means the equipment must be updated and modified as well to meet the demands of today's field engineers. AVCOM's MSNG-2500C1BLME does just that. The MSNG-2500C1BLME performs all the same tasks as its predecessor, the SNG-series, the industry standard SNG, but at a size that's over 60% shorter! The MSNG-2500C1BLME model has one BNC connector input, LNB power, and an ethernet port in the rear of the analyzer. This series also comes with mounting brackets as standard.

Improved Performance & Specifications

The MSNG-2500C1BLME is designed for the measurement of communications and broadcast carriers, making uplink, downlink, L-band carriers, IF, and 10 MHz reference signals easy to monitor and measure. The MSNG-2500C1BLME provides excellent frequency and amplitude accuracy along with RBW selection from 10 kHz to 1 MHz. This is required to allow viewing and monitoring of small Telemetry, Tracking, Command Systems (TT&C), and data carriers found in many satellite communications markets today. The front panel can control Frequency & Span with settings for Fine, Medium, and Coarse to allow the operator to dial into the carrier and control the display as needed. The use of persistence, averaging, or waterfall tools allow periodic signals like TDMA or noisy carriers to be more easily detected.

Versatile Remote Control Software

The MSNG-2500C1BLME can be monitored and controlled both locally from the front panel and remotely using the Avcom Remote Control Software via serial port or Ethernet. The Remote Control Software has an intuitive user interface that is easy to use with no special training required. It allows remote monitoring and control from your network or over the internet. Features include screen shot capture recording, SNMP for alarm/monitoring, cross-polling, markers, and Automated Data Acquisition (DAQ) with tolerance comparison, and integrated email alerts to name a few. Up to twelve windows can be displayed at one time. The Remote Control Software is available for Windows, Mac, and Linux.