The Agilent/Keysight Technologies N6751A High-Performance Autoranging DC Power Module for N6701A/02A, N6700B, N6700C/01C/02C, and N6705C/15C Power Systems, 50 V, 5 A, 50 W combines a fast output with flexible controls and sophisticated measurements. The N6751A is more than a power supply; it is a stimulus/response instrument.

To fit in 1U, the N6751A use an advanced switch-mode design that offers the low output noise and fast output speed typically found on linear power supplies.

Low Noise Outputs

Careful attention has been paid to this design to ensure low normal mode noise (ripple and peak-peak) as well as low common mode noise. This switching power supply outperforms most linear power supplies on the market.

Fast Voltage Changes

Thanks to an active down-programming circuit to rapidly pull down the output when lowering the N6751A's output voltage, this power module can rapidly program both up and down in voltage.

Note that for smaller voltage changes the programming speed is less than 200 microseconds. These output speeds allow the N6751A to give maximum system throughput when your test calls for frequent changes in power supply voltage settings.

Autoranging For Flexibility

The N6751A gives you even more flexibility by providing autoranging outputs. This autoranging capability provides maximum output power at any output voltage up 60 V. This allows one power supply to do the job of several power supplies because its operating range covers low voltage, high current as well as high voltage, low current operating points.

The flexibility of autoranging is useful when the DUT operates over a wide range of voltages, when the ATE system needs to test a wide range of DUTs, or when margin is needed because the ATE power supply must be selected before final DUT power requirements are determined.