AEMC SL50

Name: AEMC SL50 (2156.50) Simple Logger, Temperature, Thermocouple
Brand: AEMC
SKU: SL50
Price: 115.0 USD
Availability: InStock

Our Part No. SL50

Mfr. Model SL50

Catalog No. 2156.50

Skip to the end of the images gallery

Skip to the beginning of the images gallery

AEMC SL50

Our Part No. SL50

Mfr. Model SL50

Catalog No. 2156.50

Channels: One
Input: Screw connector
F°, C° Measurement Range: Thermocouple Dependent

Datasheet

$109.25 Price $115.00

This item ships FREE

Key Features

Channels: One
Input: Screw connector
F°, C° Measurement Range: Thermocouple Dependent
Accuracy: Thermocouple Dependent
Sample Rate: 16 samples/second
Storage Rate: 2 second
Storage Modes: Start/Stop
Recording Length: ≥43 days
Memory: 2 million measurements (8Mb)
Recorded data is stored in non-volatile memory and will be retained even if battery is low or removed
Communication: USB 2.0 (Simple Logger software free to download from web site)
Power Source: 2x1.5V AA (LR6) alkaline batteries or USB 5VDC
Battery Life: 43 days with new batteries when recording
Low Battery: Battery voltage display in software (Batteries need replacement when LED is dim or does not blink)
Dimensions: 3.6 x 1.44 x 1.32" (91.44 x 36.58 x 34.8mm)
Weight (with battery): 3.5oz (99g)
Case: Polycarbonate
Operating Temperature: 14° to 122°F (-10° to 50°C)
Storage Temperature: -4° to 140°F (-20° to 60°C)
Relative Humidity: Up to 85% @ 95°F (35°C)
Ingress Protection (IP): IP40
EMC: EN 61326-1
Safety Compliance: IEC 61010-1

Details

The AEMC SL50 Simple Logger, Temperature, Thermocouple is a small one channel recording device powered by two AA alkaline batteries. It can also be powered by 5V using the USB interface cable supplied. The input is configured to measure temperature from thermocouples. Types J, K, N, T, E, R and S are supported. Inputs are facilitated by two screw terminals. Sample rate is 16/sec with a storage rate of once every two seconds of the average of all (32) the samples. Application software is included with the unit by plugging it into a computer using the USB cable and downloading it from the AEMC web site. Scaling units of measure and recording length can be set through the software. Real-time graphs can be displayed, downloaded data can be analyzed, and reports printed.

The main advantage of the logger is its ability to begin recording with only the need to configure the length of time for the recording. A simple one button operation is all that's needed. The front panel LED alerts the operator of the logger's status.

More Information