Aaronia AG UBBV2

External Broadband Pre-amp 1 kHz - 10 GHz

UBBV2
UBBV2
321

Aaronia AG UBBV2

External Broadband Pre-amp 1 kHz - 10 GHz

UBBV2
UBBV2
321

The Aaronia UBBV2 External Broadband Pre-amp 1 kHz-10 GHz is the answer to measuring weak signals, boosting probe and antenna gain, as well as many other needs. Use the UBBV2 anywhere a high gain, low noise amp is called for- digging out those weak shortwave signals or putting new life into an analyzer in the frequency range 1 MHz - 10 GHz.

  • Frequency range: 1 MHz - 10 GHz
  • Noise: 3.5dB (typ.)
  • Gain: 40dB (typ.)
  • Max. power at RF input: +15dBm
This product is available for shipping to the US, Canada, and Puerto Rico only.
$1,257.60
This item ships FREE
  • Frequency range: 1 MHz - 10 GHz
  • Noise: 3.5dB (typ.)
  • Gain: 40dB (typ.)
  • Max. power at RF input: +15dBm
  • Max. power at RF output: +15dBm
  • Saturation power: -25dBm (50 ohms)
  • Input: 50 Ohm SMA (f)
  • Output: 50 Ohm SMA (m)
  • Weight: 146gr
  • Runs with battery or external power supply
  • Integrated calibration data on EEprom (readout via integrated USB interface)
  • 2mm aluminum housing
  • Includes international charger (110V/220V) and adapter
  • Interface: USB 2.0/1.1
  • Specific calibration data, readout via USB
  • For use with any brand of Spectrum Analyzers
  • Applications:
  • EMC measurements
  • Amplification of very weak signals
  • Boosts any antenna gain
  • Compensation of negative antenna gain

The Aaronia UBBV2 External Broadband Pre-amp 1 kHz-10 GHz is the answer to measuring weak signals, boosting probe and antenna gain, as well as many other needs. Use the UBBV2 anywhere a high gain, low noise amp is called for- digging out those weak shortwave signals or putting new life into an analyzer in the frequency range 1 MHz - 10 GHz. This pre-amp offers battery or AC adapter operation (internal, chargeable LiPO battery), with 40dB broadband amplification at very low noise levels. Recommended for EMC and Pre-Compliance tests like EN55011, EN55022, EN50371 etc. Attaches directly to any SPECTRAN Analyzer and is compatible with any other brand of Spectrum Analyzers. Since the UBBV2 has such a high compression point of almost 100 milliwatts, it can even be used to boost the power of small micro transmitters.

More Information
Country of OriginGermany
BrandAaronia
Catalog321
ConditionNEW
Vendor AliasAR 302/004
  • 2 - Mounting brackets for Spectran
  • 1 - Battery charger/adapter with international adapter set
  • 1 - SMA tool
  • 1 - USB cable
  • 1 - LiPo battey (installed)
  • 1 - Aluminum carrying case with foam protection
  • 1 - CD with user manual