<< Yokogawa Clamp-on AC/DC Current Testers

Yokogawa CL235
Clamp-on AC/DC Current Tester

True RMS Method of Detection
33mm in diameter of measurable conductor
Sleep function
AC voltage and resistance measurements
Approved for conformity to safety standard EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V)

Yokogawa CL235 Shown

Product Information
Datasheet	154 KB
Ordering Info
PDF Help

CL200 series has basic function of AC/DC current measurement. These clamps allow you to measure current range from 40mA to 2000A. Choose your desired diameter of measurable conductor from 24mm to 55mm.

Parameter	Reference	Accuracy
AC Current	400A/600A	1.5+5 (50/60Hz)
		3.5+5 (40~1kHz)
DC Current	400A/1000A	1.0+5
AC Current	40/400A/600V	1.5+5 (50/60Hz)
		3.5+5 (40~1kHz)
Crest Factor		≤3
Resistance	400/4000Ω	1.0+5, Beeps at below 20Ω (Continuity check)
Resistance	10 ~ 3000Hz	1.5+5
General Specifications
Parameter	Specification
Method of Detection	True RMS
Diameter of Measurable conductor	Ø33MM at maximum
Display	LCD (Digital Display: 3999 Counts)
Response Time (Approx.)	2 Seconds
Range Switching	Auto-Range
Data Hold	On All range
Peak Hold	On AC/DC Current Range; AC/DC Voltage Range
Ambient Temperature and Humidity	0-40˚C, 90% RH or less (no condensation)
Influence of external Magnetic Field	-
Influence of Conductor Position	±2% or Less
Circuit Voltage	600Vrms or less
Withstanding Voltage	5.55kV AC for one minute
Power Supply	6F22(006P) x1; or 6LR61 x 2
Battery Life	Approx. 15 hours (continuous)
Consumed Current	Approx. 15mA
Sleep Function	Automatically powered down in about 30 minutes after last switch operation
Dimensions	Approx. 91(W)x210(H)x40(D)mm
Weight	Approx. 450g

Ordering Information
Model	Description	Buy Online	Price
CL235	Yokogawa CL235 True RMS ACA, ACV, DCA, DCV		$399.00
Included Accessories
	1 - User's Manual 2 - Batteries 1 - Carrying Case	Included

Yokogawa CL235 Clamp-on AC/DC Current Tester

Yokogawa CL235
Clamp-on AC/DC Current Tester