Yokogawa CL135
Clamp-on AC Current Tester

True RMS Method of Detection
AC Current: 200A/600A
30mm in diameter of measurable conductor
Data hold function
AC voltage and resistance measurements
Approved for conformity to safety standard EN61010-1, EN61010-2-031, EN61010-2-032 (CAT. III 600 V)

Yokogawa CL135 Shown

Product Information
Datasheet	81.0 KB
Manual	221 KB
Ordering Info
PDF Help

CL100 series and 2343 series have basic function of AC current measurement. These clamps allow you to measure current range from 20mA to 1000A. Choose your desired diameter of measurable conductor from 24mm to 54mm.

Parameter	Reference	Accuracy
AC Current	200A	1.5+6 (50/60Hz)
		2.0+5 (40~1kHz)
	600A	1.0+3 (50/60Hz)
		2.0+5 (40~1kHz)
AC Voltage	200A/600A	1.0+2 (50/60Hz)
		1.5+4 (40~1kHz)
Crest Factor	40A	≤3, (50/60Hz)
Resistance	200Ω	1.2+4, Beeps at below 30Ω (Continuity check)
General Specifications
Parameter	Specification
Method of Detection	True RMS
Diameter of Measurable conductor	Ø30MM at maximum
Display	LCD (Digital Display: 1999 Counts)
Response Time (Approx.)	1 Seconds (2 seconds on Resistance renge)
Range Switching	Manual-Range
Data Hold	On All range
Ambient Temperature and Humidity	-10-50˚C, 85% RH or less (no condensation)
	Up to 30˚C, 90% RH
	Up to 40˚C, 75% RH
	Up to 50˚C, 45% RH
Influence of external Magnetic Field	2A or less at 400 A/m
Influence of Conductor Position	±3% or Less
Circuit Voltage	600Vrms or less
Withstanding Voltage	5.55kV AC for one minute
Power Supply	6F22(006P) x1; or 6LR61 x 2
Battery Life	Approx. 200 hours (continuous)
Consumed Current	Approx. 2mA
Auto Power-off	Approx. 10 Minutes
Dimensions	Approx. 93(W)x210(H)x40(D)mm
Weight	Approx. 400g
DC Output Option	-

Ordering Information
Model	Description	Buy Online	Price
CL135	Yokogawa CL135 Clamp-on AC Current tester, (True RMS ACA, ACV)		$230.00
Included Accessories
	1 - User's Manual 2 - Batteries 1 - Carrying Case	Included

Yokogawa CL135 Clamp-on AC Current Tester

Yokogawa CL135
Clamp-on AC Current Tester