<< Wiss Snips IndexWiss
Compound Action Snips
|
- Withstands strain of cutting heavy stock and
tight curves
- Self-opening action for fast, effortless feed
on most models
- Non-slip, textured grips and safety latch for
superior control
- Colored handles for ease of identification
|
 
Wiss M1R Shown
|
|
|
| |
|
Model |
Image |
Blade
Material |
Tool Length |
Blade
Edge |
Cut Direction |
Handle Color |
Buy |
Price |
|
M1R |
|
Molybdenum Steel
|
9 3/4"
(248mm) |
Serrated |
Left |
Red |
 |
$21.41 |
9 3/4" Metalmaster Compound
Action Snips, Cuts Straight to Left
9 3/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws.
Strong enough to cut 18 gauge low carbon rolled
steel, has a self-opening system for fast,
effortless feed and cutting, and Provides extra
service demanded by the compound lever action.
Left Cut, which cuts left and is capable of
tight curves to straight. |
|
M1RS1 |
 |
Molybdenum Steel |
9 3/4"
(248mm) |
Serrated |
Left |
Blue |
|
$34.33 |
9 3/4" Metalmaster Special
Series Snips, Cuts Straight to Left
9 3/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws,
specially hardened to cut exotic metals. Strong
enough to cut 18 gauge low carbon rolled steel
and has a self-opening system for fast,
effortless feed and cutting, and Provides extra
service demanded by the compound lever action.
Left Cut, which cuts left and is capable of
tight curves to straight. |
|
M2R |
 |
Molybdenum Steel |
9 3/4"
(248mm) |
Serrated |
Right |
Green |
|
$21.41 |
9 3/4" Metalmaster Compound
Action Snips, Cuts Straight to Right
9 3/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws.
Strong enough to cut 18 gauge low carbon rolled
steel and has a self-opening system for fast,
effortless feed and cutting, and Provides
extra service demanded by the compound lever
action. Right Cut, which cuts right and is
capable of tight curves to straight. Also comes
with a built-in protective safety latch. |
|
M2RS1 |
 |
Molybdenum Steel |
9 3/4"
(248mm) |
Serrated |
Right |
Blue |
|
$34.32 |
9 3/4" Metalmaster Special
Series Snips, Cuts Straight to Right
9 3/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws,
specially hardened to cut exotic metals. Strong
enough to cut 18 gauge low carbon rolled steel
and has a self-opening system for fast,
effortless feed and cutting, and Provides
extra service demanded by the compound lever
action. Right Cut, which cuts right and is
capable of tight curves to straight. |
|
M300 |
 |
Molybdenum Steel |
10 1/2"
(267mm) |
Straight |
Straight |
Red |
|
$20.81 |
10 1/2" MultiMaster Snips Hi-Viz
Handle Grips
Combines the long cuts of tinners snips with
the compound action snips, which multiplies the
power of the hand by a ratio of 5:1. Able to be
used on many materials, such as paper, plastic,
and sheet metal, it can cut up to 20 Gauge cold
carbon rolled steel. |
|
M3R |
 |
Molybdenum Steel |
9 3/4"
(248mm) |
Serrated |
Straight
Left
Right |
Yellow |
|
$21.41 |
9 3/4" Metalmaster Compound
Action Snips, Straight, Left, Right
9 3/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws.
Strong enough to cut 18 gauge low carbon rolled
steel and has a self-opening system for fast,
effortless feed and cutting, and Provides
extra service demanded by the compound lever
action. Right Cut, which cuts left, right, or
straight in light stock. Also comes with a
built-in protective safety latch. |
|
M41R |
 |
Molybdenum Steel |
9 1/4"
(235mm) |
Straight |
Combination |
Yellow |
|
$30.63 |
9 1/4" Metalmaster Pipe and Duct
Snips
9 1/4" Inches long and made with molybdenum
steel jaws and has a patented ball bearing jaw
which allows the blades to automatically adjust
to give it clearance. Strong enough to cut 20
gauge low carbon rolled steel, and also cuts
through ducts, seams, sheet metal, vinyl tiles,
and plastic laminates. Cuts curves, straight, or
any combination and has a Spring-action system
for fast, effortless feed and cutting. |
|
M5R |
 |
Molybdenum Steel |
9 1/4"
(235mm) |
Serrated |
Notching |
Red |
|
$26.38 |
9 1/4" Metalmaster Bulldog Snips
9 1/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws.
Bent at an angle to safely keep one's hands out
of the way. Made especially for notching or
trimming extra heavy stock. Strong enough to cut
16 gauge low carbon rolled steel and has a
Spring-action system for fast, effortless feed
and cutting. |
|
M6R |
 |
Molybdenum Steel |
9 1/4"
(235mm) |
Serrated |
Left
Straight |
Red |
|
$24.84 |
9 1/4" Metalmaster Offset Snips,
Cuts Straight to Left, Red Grips
9 1/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws.
Bent at an angle to safely keep one's hands out
of the way. Made especially for cutting extra
heavy stock and tight curves. Strong enough to
cut 18 gauge low carbon rolled steel and has a
Spring-action system for fast, effortless feed
and cutting. |
|
M7R |
 |
Molybdenum Steel |
9 1/4"
(235mm) |
Serrated |
Right
Straight |
Green |
|
$24.84 |
9 1/4" Metalmaster Offset Snips,
Cuts Straight to Right, Green Grips
9 1/4" Inches long and made with
wear-resistant, molybdenum steel serrated jaws.
Bent at an angle to safely keep one's hands out
of the way. Made especially for cutting extra
heavy stock and tight curves. Strong enough to
cut 18 gauge low carbon rolled steel and has a
Spring-action system for fast, effortless feed
and cutting. |
|
MPC3 |
 |
Molybdenum Steel |
9 1/4"
(229mm) |
Serrated |
Combination |
Yellow |
|
$16.49 |
9" Metal Wizz Snips
9" Inches long and made with wear-resistant,
molybdenum steel serrated jaws. This model is
designed with the home craftsman, made for
cutting screening, hardware cloth, synthetic
singles, tile gutters, and other similar
materials. Strong enough to cut 20 gauge low
carbon rolled steel and has a self-opening
system for fast, effortless feed and cutting,
and Provides extra service demanded by the
compound lever action. Right Cut, which cuts
right and is capable of tight curves to
straight. |
|
|
)
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}
){kind=small}