Wayne Kerr 1J4310R

Benchtop LCR Meter with DC Resistance, 100 kHz

4310R
1J4310R
1J4310

Wayne Kerr 1J4310R

Benchtop LCR Meter with DC Resistance, 100 kHz

4310R
1J4310R
1J4310

The Wayne Kerr 4310/R 100 kHz LCR Meter with DC Resistance is an easy to use LCR meter with comprehensive measurement functions.

  • Tests components from 20Hz to 100 kHz
  • 0.1% basic measurement accuracy
  • Fast measurement time of less than 25ms
  • Parameters C, L, Z, Y, X, B, Rac, Rdc, G, Q, D, Ø
$3,175.00
This item ships FREE
  • Tests components from 20Hz to 100 kHz
  • 0.1% basic measurement accuracy
  • Fast measurement time of less than 25ms
  • Parameters C, L, Z, Y, X, B, Rac, Rdc, G, Q, D, Ø
  • Single or two test operation
  • Up to four parameters may be displayed (two test mode)
  • Drive level from 10mV to 2Vrms
  • Scale mode with measurement target limits
  • Operator mode with target limits
  • +2V internal or up to ±40V DC external bias
  • Measurement setup with Save and Recall
  • GPIB / IEEE-488, USB, LAN and RS-232 interfaces
  • Handler Scaleizer module (optional, available separately)
  • Binning (optional, available separately)
  • Protection against charged capacitors
  • Small size and light weight

The Wayne Kerr 4310/R 100 kHz LCR Meter with DC Resistance is an easy to use LCR meter with comprehensive measurement functions. Accurate and fast measurements may be made from 20 Hz to 100 kHz, making the 4310/R meter the ideal choice for many applications in the test or production environments.

The two-test mode enables consecutive measurements to be made with two different instrument parameters set. For example, two AC measurements may be made at different frequencies or an AC and a Rdc measurement may be made.

Measurement Limits in Scale or Operator Modes

An optional component Binning module (available separately) may be specified, providing an interface to component sorting machines. Limits set in the instrument Binning mode enable a wide range of components to be sorted, while the choice of isolated or non-isolated modules give interface flexibility.

The optional Scaleizer handler module (available separately) provides PASS/FAIL and data synchronization relay outputs for limit checked measurements. Two output signal configurations are available.

Up to 20 measurements setups can be saved with user-defined names for later recall.

The 4310/R instrument may be externally controlled using the standard RS232, GPIB, USB or LAN interfaces.

More Information
BrandWayne Kerr
Catalog1J4310
ConditionNEW
Vendor Alias1J4310
  • 1 - LCR Meter
  • 1 - 1EVA40150 Kelvin Leads (fine jaws)
  • 1 - AC Power Cord
  • 1 - User Manual