Vitrek V73

Hipot Tester with Continuity, 5 kV AC/DC/IR

V73
V73

Vitrek V73

Hipot Tester with Continuity, 5 kV AC/DC/IR

V73
V73

The Vitrek V73 AC/DC/IR Hipot Tester and 5kVAC/DC/IR Electrical Safety Tester with Continuity offers an easy-to-use color touch user interface and an ultra-reliable, efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed. This unit includes USB, RS232, and Digital I/O interfaces.

  • Memory stores up to 999 steps/60 test sequences
  • 4.3 in. Color Touch Display
  • Intuitive User Interface
$2,210.95 Price $2,353.00
This item ships FREE
  • 5KVAC Electrical Safety tester with continuity
  • AC Hipot test:
    • 10 to 5000V RMS, 50/60 Hz
    • Accuracy: 1% of setting +5V, No load to full load
    • Resolution: 1V at all levels
    • Max load current: 20mArms
  • DC Hipot test:
    • 20 to 5000V
    • Accuracy: 1% of setting+ 5V, No load to full load
    • Resolution: 1V at all levels
    • Max load current: 10mA
  • Insulation Resistance Test:
    • Test Voltage: 20 to 5000VDC
    • Accuracy : 2.5% of setting +5V, No load to full load
    • Resolution : 1V at all levels
    • Max Charge Current: 5mA automatic
    • Max Capacitive Load: 2uF
  • Resistance
    • Max IR: 450Gigohm (90MΩ per volt)
    • Min IR: 150KΩ
    • Accuracy : 2% (rdg <5% of max IR), 5%(< 15% of max IR), 10% (< 30% of max IR),
    • 20% (above 30% of max IR)
    • Max Resolution : 0.1% of value
    • Min/Max Limits : Defined for each step, max may be set to none
  • Low Resistance test:
    • Range: 0ohm to 60Kohm
    • Accuracy: 1.5%+0.015Ω (<13Ω), 3%+1ohm(<1KΩ), 5%(<13KΩ)
    • Resolution: Down to 0.001Ω
    • Min test time: 60 mS
  • 4.3 in. Color Touch Display
  • Intuitive User Interface
  • Internal Self Test Fully Exercises Output and Verifies Current Accuracy
  • 20mA max source current
  • 100 nano-Amp Leakage Current Resolution
  • 2 Year Calibration Interval
  • USB 2.0, Serial/RS232, Digital I/O Interfaces
  • Continuously Variable Insulation Resistance 20-5000V, 450GΩ Max
  • Multi Mode IR with Steady/Rising Pass Mode
  • Test Memory Stores up to 999 Steps and 60 Test Sequences
  • 150μS Safety Shutdown
  • Meets UL, CSA, IEC Safety Tester Requirements, CE Safety Mark Certified to EN61010

The Vitrek V73-230V Hipot Tester with Continuity, 5 kV AC offers an easy-to-use color touch user interface and an ultra-reliable, efficient, fan-free design. Digital Signal Processing (DSP) technology offers improved speed.

The V73230V is factory set to 230V. Test options for this model are AC/DC Hipot, Low Resistance tests and Isulation resistance tests. Test completion triggers are End on Time: Determination on final reading, End on Pass: Test ends with PASS for any reading within limits, End on Fail: Test ends with FAIL for any reading outside limits, and End on Steady: Test ends with PASS for a steady/rising reading within limits.

Front Panel Features

  • 4.3 in. Color Touch Display
  • Large, Bright LED Caution Testing Indicator
  • Safety Locked HV Terminal for Hipot and IR
  • Independent LED Pass/Fail Indicators
  • Convenient Front Panel Power Switch
  • Ultra-High Reliability Start/Stop Switches

Rear Panel Features

  • Digital I/O with Safety Interlock
  • Controls up to 4 HV Scanners
  • USB 2.0 High Speed Universal Serial Port
  • RS232 Serial Port with Selectable baud rate up to 115Kbaud
  • Rugged V73 with Drop Resistant Duty Silicone Bumper
More Information
Country of OriginUnited States
BrandVitrek
ConditionNEW
Vendor AliasV73
  • 1 - TL-209 Test Lead Set
  • 1 - Power Cord
  • 1 - NIST Traceable calibration certificate without data