Tektronix THS 700A Series Specifications Digital Real-Time Oscilloscopes - Used Test Equipment at Test Equipment Depot

Model	THS720A	THS720P				THS730A
CHARACTERISTICS
Bandwidth	100MHz	100MHz				200MHz
Sample Rate (Each channel)	500MS/s	500MS/s				1GS/s
Time/Division Range	5ns to 50s/div	5ns to 50s/div				2ns to 50s/div
Power Measurements	N	Y				N
OSCILLOSCOPE FUNCTIONS
Channels	2
Sensitivity	5mV to 50V/div (to 500 V/div with 10X probe).
Position Range	± 10 div.
DC Gain Accuracy	± 2%
Vertical Resolution	8-bits
Record Length	2500 points
Time/Division Range	---		5ns to 50s/div		---
Horizontal Accuracy	± 200 ppm
Roll Mode	³ 0.5s/div
Autorange	User-selectable
Trigger Modes	Auto, normal.
Trigger Types	---	Edge, Pulse, Video, External, Motor.				---
Video Trigger Formats and Field Rates	Odd field, even field and line.
Motor Trigger	---	Triggers on 3- and 5- level pulse-width modulated power signal.				---
External Trigger Input	5MHz TTL compatible.
Harmonics	---	Up to 31st (30Hz-450Hz).				---
Waveform Processing	Add, Subtract, Multiply, Calculate Watts = V x I.
Waveform Storage	10 waveforms.
Acquisition Modes	Sample, Envelope, Average, Peak, Detect.
Cursor Measurements	DVolts, DTime, 1/DTime (Hz), Degree (Phase).
Cursor Types	Horizontal Bars, Vertical Bars, Paired (volts @ time).
DISPLAY SYSTEM
Interpolation	Sin (x)/x
Format	YT and XY
Mode	Vector, Dot, Vector Accumulate, Dot Accumulate.
AUTOMATIC MEASUREMENTS	Period			Frequency
	+ Width			- Width
	Rise Time			Fall time
	+ Duty Cycle			- Duty cycle
	+ Overshoot			- Overshoot
	High			Max
	Low			Min
	Peak-to-Peak			Amplitude
	Mean			RMS
	Cycle Mean			Cycle RMS
	Burst Width
POWER MEASUREMENTS (THS 720P only)
W	True power
VA	Apparent power
VAR	Reactive power
V	Volts (RMS, Peak)
A	Amps (RMS, Peak)
THD-F	Total harmonic distortion as a percentage of the fundamental
THD-R	Total Harmonic distortion of the RMS of the input signal
PF	Power Factor
DPF	Displacement power factor
PHI	Phase difference between the voltage and current
DMM SPECIFICATIONS
DC Voltage Ranges	400.0mV to 880V
DC Volts Accuracy	± (0.5% of reading + 5 counts)
True RMS AC Voltage Ranges	400.0mV to 640V
Maximum Float Voltage	600VRMS CAT II, each channel (probe dependent)
Resolution	4000 count, 3-3/4 digits
AC Volts Accuracy	± (2% of reading + 5 counts)
Resistance Ranges	400.0 Ohm to 40.00 megaohm
Resistance Accuracy	± (0.5% of reading + 2 counts); 40 megaohm: ± (2% of reading + 5 counts)
Diode Test Range	0 to 2V
Continuity Check	Audible tone when < 50 Ohm
Modes	Min, Max, Delta, Max-Min, Avg, Hold
Nonvolatile Storage	10 DMM screenshots
External Trigger Input	5MHz TTL compatible
Vertical Zoom Capability	2X, 5X, 10X
dB Scale	Selectable, referenced from 1mV to 10V
dBm Scale	Selectable, referenced from 50 Ohm to 600 Ohm
GENERAL SPECIFICATIONS
Setups	10 front-panel setups
Safety	UL3111-1, CSA1010.1, EN61010-1, IEC61010.1
EMC	Meets Directive 89/336/EEC
Power	NiCd rechargeable battery pack with AC adapter (both included)
Battery Life	Approx. 2 hours from full charge
Display	Backlit LCD
Display Resolution	320 x 240
PHYSICAL CHARACTERISTICS
Dimensions W x H X D	6.95 x 8.53 x 2 in			177 x 217 x 51 mm
Weight	3.2 lbs.			1.45 kg

Tektronix THS 700A Series Digital Real-Time Oscilloscopes Specifications

Tektronix THS 700A Series
Digital Real-Time Oscilloscopes Specifications