Test Equipment Depot - 800.517.8431 McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
<< Tektronix TDS 400A Series Product Page

Tektronix TDS400A Series Specifications

Model TDS-420A TDS-430A TDS-460A

SIGNAL ACQUISITION SYSTEM

Bandwidth 200MHz 400MHz
Channels 4 2 4
Sample Rate 100MS/s on all channels
Sensitivity 1 mV to 10V/div (with calibrated fine adjust)
Position Range ± 5 Divisions
Offset Range ± 1V from 1mV/div to 99.5 mV/div
±
10V from 100mV to 995mV/div
±
100V from 1V/div to 10V/div
DC Gain Accuracy ± 1.5%
Vertical Resolution 8-bits (256 levels over 10.24 vertical divisions)
Analog Bandwidth Selections 20MHz, 100MHz and full
Input Coupling AC, DC or GND
Input Impedance Selections 1 megaohm in parallel with 15pF or 50 Ohm (AC and DC coupling)
Maximum Input Voltage 300V CAT II ± 400Vp.  Derate at 20dB/decade above 1MHz.  1 megaohm or GND coupled
Channel Isolation > 100:1 at 100MHz for any two channels
AC Coupled Low Frequency Limit 10Hz when AC 1 megaohm coupled
200kHz when AC 50 Ohm coupled

ACQUISITION MODES

Peak Detect High frequency and random glitch capture. Captures glitches of 10ns using acquisition hardware at all real-time sampling rates.
Sample Sample data only
Envelope Max/min values acquired over one or more acquisitions, selectable from 2 to 2000, infinite
Average Waveform averages selectable from 2 to 10,000
Hi-res Vertical resolution improvement and noise reduction on low-frequency signals, e.g. 12-Bits at 10ms/div and slower.  Enhanced vertical resolution (> 12-Bits) for noise reduction, on low frequency signals.  Make precise low-level signal measurements (up to 5mV) with differential amplifier (ADA400A).

TIME BASE SYSTEM

Time Bases Main, Delayed
Time/Division Range 1ns to 20s/div
Time Base Accuracy 0.015% over any interval 1ms
Record Length (Real Time and Equivalent Time) Sample points per channel: 500 to 120,000 points (with Opt. XL)
Pre-trigger Position Selectable from 0 to 100% of record

TRIGGERING SYSTEM

Triggers Main, Delayed
Main Trigger Modes Auto, Normal, Single Sequence
Delayed Trigger Delayed by time or events
Time Delay Range 0ns to 20s
Events Delay Range

2 to 10,000,000 events

External Rear Input

> 1.5 kilohm; Max input voltage is ± 6V (DC + AC peak)

Video Trigger Types

NTSC, PAL, SECAM and custom; TV field, field 2 or both, any line within a field.  Line rates--10kHz to 64kHz, interlaced, noninterlaced, composite.

Video Trigger Sensitivity

0.6 divisions of composite SYNC will achieve a stable display

DISPLAY

Waveform Style

Dots or vectors.  Infinite and variable persistence from 250ms to 10s.

Gray Scaling

With variable persistence selected, waveform points gradually decay through 16 levels of intensity, providing "z-axis" information about rapidly changing waveforms.

Update Rate

200 ea. 500 point waveforms per sec with infinite persistence mode selected

Graticules

Full, grid, cross hair, frame

Format

YT and XY

VGA Out

Drives VGA display monitors

ZOOM

The zoom feature allows waveforms to be expanded, compressed and positioned in both vertical and horizontal axes.  Allows precise comparison and study of fine waveform detail without affecting ongoing acquisitions.  When used with Hi-res or Average acquisition modes, Zoom provides an effective vertical dynamic range of 1000 divisions or 100 screens.

MEASUREMENT SYSTEM

Automatic Waveform Measurements

Period Frequency
High Low
+ Width - Width
Maximum Minimum
Rise Fall
Peak to Peak Amplitude
+ Duty cycle - Duty cycle
+ Overshoot - Overshoot
Propagation delay Burst width
Mean Cycle mean
RMS Cycle RMS
Area Cycle area
Phase -
Continuous update of up to four measurements on any combination of waveforms.
Thresholds Settable in percentage or voltage
Gated  Any region of the record may be isolated for measurement using vertical bars
Snapshot Performs all measurements on any one waveform showing results from one instant in time
Cursor Measurements Absolute, Delta, Volts, Time, Frequency
Cursor Types Horizontal bars (volts); vertical bars (time); paired; operated independently or in tracking mode

WAVEFORM PROCESSING

Waveform Functions Interpolate-selectable sin(x)/x or linear, Average, Envelope
Advanced Waveform Functions FFT, Integration, Differentiation (Opt. XL
Arithmetic Operators Add, Subtract, Multiply, Invert
Autosetup Single button, automatic setup on selected input signal for vertical, horizontal and trigger systems
Waveform Limit Testing Compares incoming waveform to a reference waveform's upper and lower limits

COMPUTER INTERFACE

GPIB (IEEE 488.2) Programmability Full talk/listen modes.  Control of all modes, settings and measurements

HARDCOPY/DESKTOP PUBLISHING

Printer

HP ThinkJet, Epson, PostScript, Interleaf, DeskJet, TIFF, PCX, BMP (Microsoft Windows)

Plotter HPGL
Interface GPIB standard
Hardcopy Interface Centronics Type and RS-232 (Opt. XL)

STORAGE

Waveforms 120,000 waveform points of nonvolatile storage (with Opt. XL)
Floppy Drive 3.5 in. 1.44MB or 720KB MS DOS compatible (store waveforms, screen data, and setups)
Setups 10 front-panel setups

CRT

Type 7 in. diagonal, magnetic deflection.  Horizontal raster-scan.  P31 green phosphor
Resolution 640 horizontal by 480 vertical displayed pixels

POWER REQUIREMENTS

Line Voltage Range 90 to 250VRMS
Line Frequency 48 to 440Hz
Power Consumption 240W max

ENVIRONMENTAL SAFETY

Temperature Operating: 0°C to +50°C.  Nonoperating: -40°C to +75°C
Humidity Operating and nonoperating: Up to 95% relative humidity at or below +40°C; to 75% relative humidity from +41°C to +50°C
Altitude Operating: 15,000 ft., nonoperating: 40,000 ft
Electromagnetic Compatibility 89/336/EEC
Safety UL3111-1, CSA1010.1, EN61010-1, IEC61010-1

PHYSICAL CHARACTERISTICS

Dimensions Inches Millimeters
Height 6.4 164
Height w/acc. pouch 7.5 177
Width 14.25 362
Depth w/front cover installed 19.33 491
Depth w/handle extended 22.7 576
Weight Pounds Kilograms
Net (approx) 22.5 9.1
Shipping (approx) 32 12.5

Tektronix TDS 400A Series Main Product Page

 

Used Equipment Catalog

$20.00 Minimum on Total Order

Home Page | Test Equipment Catalog | Specials | Repair
We Buy Surplus | Ordering/Contact Info
____________________________________________________________

99 Washington Street, Melrose, MA 02176
781.665.1400 | 800.517.8431 | Fax: 781.665.0780 | Email:

Copyright © Fotronic Corporation All Rights Reserved