- Intuitive call processing interface for
cellular phone test
- Functions of more than 20 complete instruments
- Frequency ranges:
- Signal Generator: 30 MHz to 1 GHz
- RF Analyzer: 10 MHz to 1 GHz
- Portable and lightweight
- Optional full-span spectrum analyzer, tracking
generator and adjacent channel power meter
- Built-in IBASIC computer
- Available Options, Below
|
 
Agilent / HP 8920A
RF Communication Test Set
|
|
HP 8920A is a full-feature, one-box test set designed to meet
service and repair needs in the cellular and land mobile
communications market. Combining 22 instruments, the HP 8920A offers
full functionality needed in testing cellular phones, land mobile
radios, and communications systems up to 1 GHz.
Test and Troubleshoot Faster
The HP 8920A decreases test and troubleshooting time by simplifying
standard measurement tasks and providing extensive capability in one box.
Transmitters and receivers are simply characterized with single-key RX, TX, and duplex
tests. Measured results are displayed on a single screen as either digital
measurements or analog bar graphs. All settings and measurements are easily accessed
and changed using the front-panel knob, and all settings can be saved in nonvolatile
save/recall registers or on a SRAM card media for future access.
Spectrum Analyzer with Tracking Generator and Adjacent Channel Power
The HP 8920A's optional synthesized spectrum analyzer measures
signals from 400 kHz to 1 GHz with variable spans from 5 kHz to 1 GHz (full span).
Display resolution is selectable from 1, 2, or 10 dB per division. The tunable
marker provides automatic readout of frequency and amplitude, or of relative frequency or
amplitude from a reference. The tracking generator included with the spectrum
analyzer allows for swept characterization of devices with fully settable amplitude and
sweep spans (to 1 GHz). The newly added adjacent channel power measurement
capability includes both variable bandwidths and variable frequency offsets.
Typical performance is -70 dBc.
Signaling Encoder and Decoder
The optional signaling encoder and decoder support all common
signaling formats, including tone sequential, digital paging, DTMF, trunking, and cellular
signaling. Common standards are list-selectable and easily modified for different
user formats. The decoder displays the tone or digital sequence transmitted, and the
duration of the tone or tone pair. For digital paging transmitters, the decoder will
display the address/code, the message, and the transmission rate.
|
)
PDF Help