Hewlett Packard 8569B 0.01 to 22 GHz Spectrum Analyzer Specifications, Refurbished HP Agilent Hewlett Packard - Used Test Equipment at Test Equipment Depot

FREQUENCY SPECIFICATIONS
Frequency Range	10 MHz to 22 GHz
The HP 8569B is extendable to 40 GHz with Option E02, to 71 GHz with the HP 11971Q/U/V Mixers, and to 115 GHz with commercially available mixers.
Center Frequency Accuracy	± (5 MHz to 0.02% of center frequency, whichever is greater; + 20% of Frequency Span/Div)
Frequency Spans	1.7 to 22 GHz: multiband span from 1.7 to 22 GHz in one sweep
Full Band	displays spectrum of entire band selected
Per Division	1 kHz to 500 MHz/div in a 1, 2, 5 sequence
Accuracy	± 5%, 20 kHz to 500 MHz/div unstabilized ± 15%, 1 kHz to 100 kHz/div stabilized
Stability
Total Residual FM	< 100 Hz p-p in 0.1 sec stabilized
Noise Sidebands	> 75 dB down, at 30 kHz offset
Resolution Bandwidths (-3 dB)	100 Hz to 3 MHz, in 1, 3 sequence
Resolution Bandwidth Accuracy	± 15%
AMPLITUDE SPECIFICATIONS
Maximum Safe Input Power
Total Average Continuous Power	+ 30 dBm
Peak Pulse Power	+ 50 dBm (<10 µs pulse width, 0.01% duty cycle) with 20 dB input attenuation
Gain Compression	≤-7 ≤dBm at the mixer for < 1 dB compression
Input Attenuator
Range	0 to 70 dB, in 10 dB steps
Step Accuracy	≤ 1.0 dB to 18 GHz, ≤ 1.5 dB to 22 GHz
Displayed Average Noise Level: (1 kHz RBW, 3 Hz VBW, 0 dB input attenuation)	Frequency (GHz)	Average Noise (dBm)
	0.01 - 1.8 1.7 - 4.1 3.8 - 8.5 5.8 - 12.9 8.5 - 18 10.5 - 22	-113 -110 -107 -100 -95 -90
Amplitude Accuracy
Frequency Response: (Ref. to 100 MHz, -10 dBm with 10 dB attenuation)	Frequency (GHz)	Frequency Response^* (± dB max)
	0.01 - 1.8 0.01 - 4.1 0.01 - 12.9 0.01 - 18 0.01 - 22	1.2 1.5 2.5 3.0 4.5
^*Frequency response includes input attenuator, preselector and mixer frequency response plus mixing mode gain variation (band to band).
Reference Level
Range	+60 dBm to -112 dBm in 10 dB steps and continuous 0 to -12 vernier
IF Step Gain	≤0.5 dB, -10 to -70 dBm; 1.0 dB, -80 to -100 dBm
Calibrator Output	100 MHz ± 10 kHz; -10 dBm ± 0.3 dB
Display Range
Log	< 1, 2, 5, 10 dB/div over 8 divisions
Linear	0.56 µV to 224 V in 50 ohm
Display Accuracy
Log	< ± 0.1 dB/dB to ± 1.5 dB max, 0 to 70 dB range
Linear	< ± 3% over full 8 division deflection
Residual Responses	< -90 dBm, with 0 dB input atten. and no signal at input
SWEEP SPECIFICATIONS
Sweep Time	Auto: sweep time is automatically controlled by Frequency Span/Div. Resolution Bandwidth and Video Filter controls to maintain an absolute amplitude calibrated display. Calibrated sweep times: 2 µs to 10 s/div in 1, 2, 5 sequence
INPUT OUTPUT CHARACTERISTICS
RF Input
Connector Type	Precision type N female
Input Impedance	50 ohms nominal
SWR (with > 10 dB input atten.)	< 1.3, 0.01 to 1.8 GHz; < 2.0, 1.7 to 22 GHz
LO Emission (2.0 to 4.46 GHz)	< -60 dBm, 0.01 to 1.8 GHz; < -80 dBm, 1.7 - 22 GHz
HP-IB
Direct Plotter Control	all displayed information can be transferred to an HP-IB plotter by using only front-panel pushbuttons
Interface Functions	AH1, C0, DC1, DT0, E2, L4, PP0, RL0, SH1, SR0, T7
Auxiliary Inputs	Blanking, External Sweep and Trigger, Retrace
Auxiliary Outputs	Blanking, Horizontal Sweep, 21.4 MHz IF, Vertical
GENERAL SPECIFICATIONS
Operating Temperature	0 to 55°C
Operating Humidity	95% R.H., 0 to 40° C
Warm-up Time	1 hour
EMI	Conducted and radiated interference is in compliance with MIL-STD 461A methods CE03 and RE02, CISPR Publication 11 (1975), and Messempfaenger - Poostverfuergung 526/527/79 (Kennizeichnung Mit F-Nummer/Funkschutzzeichen)
Power-Line Requirements
Operating Voltage	100, 120, 220, or 240 (+5%, -10%) VAC
Operating Frequency	48 to 66 Hz
Maximum Power	280 VA
Weight
Net	29.2 kg (64 lb)
Shipping	41 kg (90 lb)
STANDARD OPTIONS AVAILABLE
Opt 001, Internal Comb Generator	100 MHz comb signals visible through 22 GHz for increased frequency accuracy (error < 0.007%, typically ± 1 MHz at 22 GHz) and preselector peaking verification
Opt 002, Delete 100, 300 Hz Bandwidths	standard specifications apply except minimum resolution bandwidth is 1 kHz with 15:1 shape factor, residual FM < 200 Hz when stabilized
Opt 003, High Power LO Output	provides +14 dBm for direct use with HP 11971 series external mixers
Opt 400, 400 Hz Power Line Operation	Extends line frequency operation for 100 and 120 VAC lines; 48 to 440 Hz