|
|
|
|
|
|
|
|
<< HP 8559A Product
PageAgilent / HP 8559A |
| FREQUENCY | ||||
| Frequency Range | 0.01 to 21 GHz in six selectable ranges | |||
| Frequency Spans | ||||
| Fullband | displays entire spectrum of selected band | |||
| Per Division | 10 kHz to 200 MHz/div in a 1, 2, 5 sequence | |||
| Zero Span | analyzer functions as a manually tuned receiver | |||
| Frequency Accuracy | ||||
| Tuning Accuracy | 0.01 to 3 GHz: < ± (1 MHz + 0.3% of center frequency); 3 to 21 GHz: < ± (5 MHz + 0.2% of center frequency) | |||
| Frequency Span Accuracy | < ± 5% of displayed frequency separation | |||
| Spectral Resolution | ||||
| Resolution Bandwidths | eight selectable resolution (3-dB) bandwidths from 1 kHz to 3 MHz in a 1, 3 sequence. Bandwidth and frequency span are independently variable or may be coupled for optimum display when control markers are aligned. | |||
| Resolution Bandwidth Accuracy | 3-dB points are < ± 15% (except for 3 MHz bandwidth: ± 30% ) | |||
| Selectivity | (60-dB/3-dB bandwidth ratio) < 15:1 | |||
| Spectral Stability | (fundamental mixing, bands 0.01-3 GHz and 6-9 GHz) | |||
| Residual FM | < 1 kHz p-p in 0.1 second | |||
| Noise Sidebands | 70 dB down, 30 kHz from center of CW signal with 1 kHz resolution bandwidth and full video filtering | |||
| AMPLITUDE | ||||
| Amplitude Range | -111 to +30 dBm | |||
| Maximum Input (damage) Levels | ||||
| Total Power | +20 dBm (100 mΩ, 2.2 Vrms) with 0 dB input attenuation; +30 dBm (1 watt, 7.1 Vrms) with 10 dB input attenuation | |||
| dc or ac (< 100 Hz) | ± 7.1 V | |||
| Peak Pulse Power | + 50 dBm (100 Ω, < 10 ms pulse width, 0.01% duty cycle) with 30 dB input attenuation | |||
| Gain Compression | < 0.5 dB for -10 dBm signal, 0 dB input attenuation | |||
| Average Noise Level | Frequency Range (GHz) | Avg. Noise Level (dBm/1 kHz) | Frequency Response (± dB max.) | Amplitude Accuracy (± dB max.) |
| 0.01-3 6.0-9 3.0-9 9.0-15 6.0-15 12.1-18 18.0-21 |
-111 -108 -103 -98 -93 -92 -90 |
1.0 1.0 1.5 1.8 2.1 2.3 3.0 |
2.3 2.3 2.8 3.1 3.4 3.6 4.3 |
|
| Alternate IF | regular IF at 3.0075 GHz; alternate IF available at 2.9925 GHz for all frequency bands | |||
| Calibrated Display Range | ||||
| Log | 70 dB with 10 dB/div scale; 8 dB with 1 dB/div scale | |||
| Linear | 8 divisions with linear (LIN) amplitude scale | |||
| Amplitude Accuracy | ||||
| Calibrator | -10 dBm ± 0.3 dB (into 50 Ω), 35 MHz ± 400 kHz | |||
| Reference Level | 10 dB steps and a 12 dB vernier for calibrated adjustment from -112 dBm to +60 dBm | |||
| Step Accuracy (with 0 dB input attenuation) | -10 to -80 dBm: ± 0.5 dB, -10 to -100 dBm: ± 0.1 dB | |||
| Vernier Accuracy | ± 0.5 dB | |||
| Frequency Response | see table above; includes input attenuator mixer flatness, and mixing mode gain variation (band to band), with 0 1or 10 dB input attenuation | |||
| Input Attenuator | 0 to 70 dB, selectable in 10 dB steps | |||
| Step Accuracy | < ± 1.0 dB per 10 dB step (0 to 60 dB, 0.01 to 18 GHz) | |||
| Maximum Cumulative Error | < ± 2.4 dB (0 to 60 dB, 0.01 to 18 GHz) | |||
| Bandwidth Switching (Amplitude Variation) | ||||
| 3 MHz to 30 kHz | < ± 0.5 dB | |||
| 3 MHz to 1 kHz | < ± 1.0 dB | |||
| Display Fidelity | ||||
| Log Incremental Accuracy | ± 0.1 dB/dB from Reference Level | |||
| Log Maximum Cumulative Error | ± 1.5 dB over 70 dB range | |||
| Linear Accuracy | ± 3% of Reference Level | |||
| Spurious Responses | ||||
| Second Harmonic Distortion | > 70 dB below a -40 dBm signal with 0 dB input attenuation | |||
| Third Order Intermodulation Distortion | > 70 dB below two -30 dBm input signals (> 5 MHz) separated by 50 kHz and with 0 dB input attenuation | |||
| Residual Responses | < -90 dBm with 0 dB input attenuation and no signal present at input (0.013 -3 GHz, 6-9 GHz) | |||
| SWEEP CHARACTERISTICS | ||||
| Automatic | sweeptime is automatically adjusted to maintain absolute amplitude calibration for any combination of frequency span, resolution bandwidth, and video filter bandwidth | |||
| Calibrated Sweep Times | 2 msec to 10 sec/div in a 1, 2, 5 sequence
(except 2 sec/div), ± 10%
accuracy (± 20% for 5/10
sec/div) to 10 sec/div in 1, 2, 5 sequence with ± 10% typical accuracy |
|||
| Manual Sweep | spectrum analyzer may be swept manually in either direction with front panel control | |||
| SIGNAL INPUT CHARACTERISTICS | ||||
| Input Impedance | 50 Ω nominal; precision Type-N female connector | |||
| Input SWR | typically < 2.0, 0 dB input attenuation < 1.3, 10 dB input attenuation | |||
| OUTPUT CHARACTERISTICS | ||||
| Vertical Output, AUX A | BNC output (50 Ω) detected video from 0 to 0.8 V for 8 division deflection on CRT display | |||
| Penlift/Blanking, AUX B | BNC output provides 0 V pen down/unblanking signal at low impedance; 15 V penlift/blanking at 10 kΩ impedance | |||
| 21.4 MHz IF Output, AUX C | BNC output (50 Ω) provides a signal which is proportional to the RF input. Level is about -10 dBm (into 50 Ω) with a signal displayed at the Reference Level. Output is controlled by settings of Resolution BW, Input Atten, and Reference Level | |||
| Horizontal Output, AUX D | BNC output (5 kΩ) provides horizontal sweep from -5 V to +5 V for full 10 division CRT horizontal deflection | |||
$20.00 Minimum on Total Order
Home Page | Test Equipment Catalog | Specials | Repair
We Buy Surplus | Ordering/Contact Info
____________________________________________________________
99 Washington Street, Melrose, MA 02176
781.665.1400 | 800.517.8431 | Fax: 781.665.0780 | Email:
Copyright © Fotronic Corporation All Rights Reserved
