Agilent / HP 8642B
Synthesized Signal Generator
100 kHz to 2100 MHz, Refurbished

• 100 kHz to 2.115 GHz
• < -134 dBc/Hz SSB phase noise at 20 kHz offset
• -100 dBc non harmonic spurious
• +20 dBm maximum output level
• AM, FM, FM and pulse modulation
• On-site repair and calibration
• Available Options, Below

HP 8642B synthesized signal generators are high-performance, programmable signal generators intended for demanding out-of-channel RF receiver measurements and other stringent RF applications.  The HP 8642B covers the frequency range from 100 kHz to 2115 MHz.

Low SSB Phase Noise

HP 8642B provides state-of-the-art in the SSB phase noise at 20 kHz offsets of -134 dBc/Hz at 1 GHz.

-100 dBc Spurious

Non-harmonic spurious are held to below -100 dBc up to 1 GHz and to below -94 dBc above 1 GHz.  This generator allows receiver spurious rejection tests to be fully automated with the utmost confidence in test results.

Repeatability and Level Accuracy

In addition to a high-readability attenuator, absolute output level accuracy is ±1 dB down to -127 dBm (0.1µV).  In research and development or on the production line, the HP 8642B will accurately measure receiver sensitivities.

Up to +20 dBm Output Level

Up to +20 dBm is available from the HP 8642B to perform a variety of high-level measurements, often eliminating the need for external amplifiers.  This extra power can be used to overcome cabling losses.  With the relative amplitude feature, the display can be offset to show correct output level at the end of the cable.  

AM, FM, FM and Pulse Modulation

HP 8642B offers AM, FM, FM, and pulse modulation across their full frequency ranges.  A low distortion internal modulation oscillator can be used to modulate the HP 8642B up to 100 kHz rates.  The internal audio oscillator can also be used as a standalone audio source with variable rates and levels.