|
HP 8082A is
a fast pulse generator with all pulse parameters variable. With repetition
rates to 250MHz, transition times down to 1ns and amplitudes to 5V, the HP 8082A
is ideally suited for state-of-the-art TTL and ECL logic designs. Using
the HP 8082A, you can rapidly test logic circuits under all operating conditions
by simply varying pulse parameters. Although a highly sophisticated
instrument, the HP 8082A is still easy to operate because of its logical front
panel layout and switch selectable ECL output levels. Another feature that
contributes to ease of operation is the square wave mode. You can,
for example, carry out toggle rate tests in this mode up to 250MHz
without having to worry about pulse duty cycle. Hybrid IC's, manufactured by Hewlett-Packard, are used
extensively in the design of the HP 8082A. These ICs eliminate the need
for fans, reduce power consumption and enable a low reactance 50 ohm source
impedance to be used. This source impedance absorbs 98% of reflections
from signals up to 4V amplitude. |
)
PDF Help