| SOURCE CHARACTERISTICS |
| Frequency |
| Range |
300 kHz to 1300 MHz |
| Resolution |
1 Hz |
| Accuracy |
< 5ppm |
| Output |
| Power Range |
0 to 16 dBm
w/attenuator: -60 to 13 dBm
75 Ω reduces output by 3 dB |
| Resolution |
| Port Flatness |
+/-1.0 dB
w/attenuator: -60 to 13 dBm
w/meter correction: ± 0.3 dB |
| Single Purity |
| Harmonics |
< -30 dBc |
| Spurious |
< 30 dBc |
| Phase Noise |
< 67 dBc/Hz, at 10 kHz (typical) |
| RECEIVER CHARACTERISTICS |
| Frequency Range |
Narrowband: 300 kHz to 1300 MHz
Broadband: 10 MHz to 1300 MHz |
| Dynamic Range |
| 50 Ω
Narrowband |
> 90 dB |
Broadband
|
> 66 dB |
| 75 Ω
Narrowband |
> 87 dB |
Broadband
|
> 63 dB |
| MAXIMUM INPUT
(0.1 dB compression) |
Narrowband
|
10 dBm |
Broadband
|
16 dBm |
| Input Damage Level |
20 dBm |
| TEST SET CHARACTERISTICS |
| Test Port Match |
20 dB |
| System Directivity |
40 dB |
| RF CONNECTORS |
| Test Ports |
50 Ω Type N (f)
75 Ω Type N (f) |
| PHYSICAL CHARACTERISTICS |
| Size |
180 mm H X 430 mm W X 480 mm D (7 in X 17
in X 18.75 in) |
| Weight |
Net, 20.5 kg (45 lbs.); shipping, 25 kg (55 lbs.) |
| DETECTORS/BRIDGES |
| HP 86200A 50 Ω
Scalar Detector |
An external scalar detector for use when measuring external 50
Ω
devices. |
| HP 86201A 75 Ω
Scalar Detector |
An external scalar detector for use when measuring external 75
Ω
devices. |
| HP 86205A 50 Ω
Bridge |
An external directional bridge which offers high directivity and excellent port match
designed for 50 Ω device measurements. |
| HP 86207A 75 Ω
Bridge |
An external directional bridge which offers high directivity and excellent port match
designed for 75 Ω device measurements. |
| External detectors (50 and 75
Ω) and bridge are
available for remote device measurements. An unmodulated dc detection mode measures
the microwave power directly without using modulation techniques. |
| UPGRADE KITS |
| The following upgrade kits add optional
measurement capability to existing HP 8711A network analyzers. |
| HP 86223A Attenuator Upgrade Kit |
Provides the necessary components to retrofit an HP 8711A with a 60 dB step attenuator
(Option 1E1). Includes installation at an HP service center. Also available as HP
p/n 08711-60060. |
| HP 86224A IBASIC Upgrade Kit |
Provides the necessary components to retrofit an HP 8711A with IBASIC capabilities
(Option 1C2). Includes installation at an HP service center. Also available as HP
p/n 08711-60061. |
| NP C1405A/ABA DIN Keyboard |
PC keyboard to enhance editing capability (Option 1CL). |
| Calibration Kits |
Accuracy enhancement characterizes the systematic errors by measuring known devices
(standards) over the frequency range of interest. Kits for the HP 8711A contains
standards to characterize these errors. |
| HP 85032E 50 Ω
Calibration Kit |
Contains 50 Ω
Type N standards used to calibrate the HP
8711A for measurements of devices with 50 Ω
Type N connectors.
Standards include fixed termination, open circuit and short circuit. |
| HP 85036E 75 Ω
Calibration Kit |
Contains 75 Ω
Type N standards used to calibrate the HP
8711A for measurements of devices with 75 W Type N
connectors. Standards include fixed termination, open circuit, and short circuit. |
| ACCESSORIES |
| HP 11852B 50/75 Ω
Minimum Loss Pad |
A low SWR minimum loss pad required when measurements are made on 75 Ω devices using a 50 Ω
measurement system. |
| HP 11853A Type N Accessory Kit |
Accessory kit which provides the RF components required for measuring devices having
50 Ω Type N connectors. |
| HP 11854A BNC Accessory Kit |
Accessory kit which provides the RF components required for measuring devices having
50 Ω BNC connectors. |
| HP 11855A Type N Accessory Kit |
Accessory kit which provides the RF components required for measuring devices having
75 Ω Type N connectors. |
| HP 11856A BNC Accessory Kit |
Accessory kit which provides the RF components required for measuring devices having
75 Ω BNC connectors. |
| HP 86211A Type N/TNC Adapter Kit |
Adapter kit which provides Type N to Type F adapters necessary when measuring Type F
devices on a network analyzer with Type N ports. |
| HP86212A Type N/TNC Adapter Kit |
Adapter kit which provides Type N to TNC adapters necessary when measuring TNC devices
on a network analyzer with Type N ports. |
| Test Port Cables |
Replacement test port cables are available as HP part numbers. The analyzer
ships with the 50 Ω BNC cable as standard. |
