Hewlett Packard 4286A
1 GHz LCR Meter Specifications

Measurement Parameters	\|Z\|, \|Y\|, q, R, X, G, B, L, C, Q, D, ESR
Measurement Circuit Mode	Series and parallel
Operating Frequency	1 MHz to 1 GHz
Frequency Resolution	10 kHz
Source Characteristics
OSC Level	10 mVrms to 1 Vrms; (output terminal open); 10 mVrms to 0.5 Vrms @ 3 m test head, ± 500 MHz
Basic OSC Level Accuracy	2 dB @ V ± 0.25 V
Display Level Unit	V, I, dBm
Level Monitor Function	Voltage, current
Connector	APC-3.5
Output Impedance (Nominal Value)	50 Ω
Trigger	Internal, external, manual, and HP-IB
Delay Time	Point delay time, list-sweep delay time
Averaging	Point averaging, list-sweep average
Impedance Measurement Range	200 mΩ to 3Ω
Basic Measurement Accuracy	\|Z\|: 1%, D: 0.01
Measurement Time	15 ms
Interface	HP-IB, handler interface
Display	7-inch B/W CRT display
Storage
Type	Built-in 3.5-inch floppy disk drive; backup SRAM disk memory
Disk Format	LIF, DOS
Programming	HP Instrument BASIC (Option 1C2)
General Specifications
Operating Temperature/Humidity	10 to 50°C/15% to 80% RH
Warm-Up Time	30 min.
Power Requirements	90 V to 132 V, or 198 V to 264 V, 47 Hz to 66 Hz, 500 VA max.
Size/Weight
Main Frame	426 mm W X 234 mm H X 537 mm D; 28 kg
Test Head	110 mm W X 55 mm H X 28 mm D; 0.3 kg
Key Literature	HP Precision LCR Meter Family Data Sheet, p/n 5963-5391E HP 4286A Technical Specifications, p/n 5963-5394E LCR Meters, Impedance Analyzers and Test Fixtures Selection Guide, p/n 5952-1430E

$20.00 Minimum on Total Order