Test Equipment Depot - 800.517.8431 Free Ground Shipping Offer
McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
View Shopping Cart | My Account
Test Equipment Catalog Specials Repair Surplus Ordering/Contact Info
 

Used Test Equipment
Completely refurbished,
aligned & calibrated to original
manufacturers' specifications
Used Equipment Catalog
<< DSP4000s Main Page

DSP-4000 Series Specifications
Cable Types Shielded and Unshielded Twisted Pair (STP and UTP) LAN Cabling:
  • TIA Category 3, 4, 5, 5E and 6: 100W
  • ISO/IEC Class C and D: 100W and 120W

Foil-Screened Twisted Pair (ScTP):

  • TIA Category 3, 4, 5, 5E and 6: 100W
  • ISO/IEC Class C and D: 100W and 120W

Shielded Twisted Pair (STP):

  • 150W IBM Type 1, 6, and 9(adapter required)

Coax:

  • 10BASE5 ThickNet, 10BASE2 ThinNet, RG-58, RG-58 Foam, RG-59, RG-59 Foam, RG-8, RG-8A/U, and RG-62

Fiber:

  • Multimode and singlemode fiber using fiber test accessories
Test Standards
  • TIA Category 3 and 5E per Addendum #5 to TIA/EIA-568A
  • TIA Category 5 (new) per TIA TSB-95
  • TIA Category 6 per TIA Addendum #1 to TIA/EIA-568B (draft)
  • ISO/IEC 11801 Class C and D (new)
  • ISO/IEC 11801-2000 Class C and D (new)
  • STP cabling, (IBM Type 1, 150 W)
  • ANSI TP-PMD
  • IEEE 802.3 10BASE5, 10BASE2
  • IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
  • IEEE 802.5
Speed of Autotest Full Autotest of Cat 5 UTP cable, including 6 pair combinations for NEXT in both directions, in approximately 10 seconds.
Supported Tests (Range of test is determined by network or selected standard)
NEXT, NEXT @ Remote
Wire Map
Characteristic Impedance
Length
DC Loop Resistance
Propagation Delay
Return Loss (RL), RL @ Remote
Delay Skew
Attenuation
Attenuation-to-Crosstalk Ratio (ACR), ACR @ Remote
Power Sum ACR, PSACR @ Remote
ELFEXT, ELFEXT @ Remote
Power Sum ELFEXT, PSELFEXT @ Remote
Power Sum NEXT, PSNEXT @ Remote
LAN Traffic
  • Monitor provides an audible tone to indicate amount of traffic
  • Monitors 10BASE-T Ethernet traffic using the Monitor RJ45 jack
  • Monitors 100BASE-TX Ethernet traffic using the Monitor RJ45 jack
  • Auto-negotiates between 10BASE-T and 100BASE-TX using the Monitor RJ45 jack
  • Blinks the Link Light on a 10BASE-T, 10/100BASE-TX or a 100BASE-TX hub
Cable Tone Generator Provides a tone generator that can be detected by a handheld tone probe
Display Graphic bit-mapped LCD with back light and adjustable contrast
Test Connections Variable (depending on Link Interface Adapter used)
Input Protection Protected against continuous Telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
EMC EMC compliant
Case High impact plastic with shock absorbing overmold
Dimensions Main unit and smart remote including link interface adapter:
11" x 5" x 3" (28 cm x 12.7 cm x 7.6 cm)
Weight Main unit: 3 lbs., 4 oz (1.5 kg)
Smart remote: 3 lbs., 1 oz (1.4 kg)
Power Main instrument and smart remote:
Rechargeable NiMH battery 7.2V, 3400 mAH
Typical battery life 10-12 hours, with recharge time of 4 hours
May be charged while in the instrument (while operating or off-line)
Languages Supported English, French, German, Spanish, Italian, Portuguese, Japanese, and Simplified Chinese
Calibration Service center calibration period is 1 year. Self-calibration required every 30 days.
 

Used Equipment Catalog

$40.00 Minimum on Total Order