<< Fluke DSP-2000
Product PageFluke Networks DSP 2000 Specifications
| Cable
Types |
UTP, FTP, ScTP,
STP, Coax |
| Test
Standards |
TIA Cat 3, 4,
and 5 Basic Link or Channel
ISO11801 Class A, B, C, or D
IEEE 10Base5, 10Base2, or 10base-T
IEEE Token Ring 4 Mbps or 16 Mbps
IEEE 100Base-TX, 100Base-T4
IEEE 802.12 (100VG-AnyLan) 4-UTP or 2-STP
ANSI TP-PMD
Aus/NZ Class C, D Basic Link or Channel |
| Speed
of Autotest |
Full Autotest
of Category 5 UTP cable, including 6 pair combinations for NEXT in both
directions, in less than 20 seconds. |
| Supported
Tests |
(Range of test
is determined by network or selected standard)
Wire Map
Length, Propagation Delay, Delay Skew
Attenuation
NEXT, NEXT @ Remote
Power Sum NEXT, PSNET @ Remote
Attenuation-to-Crosstalk Ratio (ACR), ACR @ Remote
Characteristic Impedance
DC Loop Resistance
Return Loss (RL), RL @ Remote |
| Cable
Tone Generator |
Tone generator
can be detected by a handheld tone probe. |
| Display |
Graphic
bit-mapped LCD with back light and adjustable contrast |
| Test
Connections |
Two shielded
8-pin modular connectors, RJ-45 |
| Input
Protection |
Protected
against continuous telco voltages and 100 mA over-current.
Occasional ISDN over-voltages will not cause damage. |
| EMC |
EMC compliant.
CE certification by NMi Certin BV. Number FLK95003.CFT dated on 3-Oct-95. |
| Power |
Main
instrument and Smart Remote unit: Rechargeable NiCad battery with 10-12
hours typical battery life |
| Size |
22.5 x 13 x
7.6 cm (9 x 5 x 3 in) |
| Weight |
1.5 kg (3.25
lb) |
| Languages
Supported |
English,
Spanish, Italian, French, German, Portuguese, Chinese, Korean and Japanese |
|
