Fluke DSP-100 Digital Cable Meter Complete Specifications - Used Test Equipment at Test Equipment Depot

Cable Types	UTP, FTP, ScTP, STP, Coax
Test Standards	TIA Cat 3, 4, and 5 Basic Link or Channel ISO11801 Class A, B, C, or D IEEE 10Base5, 10Base2, or 10base-T IEEE Token Ring 4 Mbps or 16 Mbps IEEE 100Base-TX, 100Base-T4 IEEE 802.12 (100VG-AnyLan) 4-UTP or 2-STP ANSI TP-PMD Aus/NZ Class C, D Basic Link or Channel
Speed of Autotest	Full Autotest of Category 5 UTP cable, including 6 pair combinations for NEXT in both directions, in less than 17 seconds
Supported Tests	(Range of test is determined by network or selected standard) Wire Map Length, Propagation Delay, Delay Skew Attenuation Attenuation-to-Crosstalk Ratio (ACR), ACR @ Remote Characteristic Impedance DC Loop Resistance Return Loss (RL)
Display	Graphic bit-mapped LCD with back light and adjustable contrast
Test Connections	One shielded 8-pin modular connector, (RJ45), and one BNC connector
Input Protection	Protected against continuous telco voltages and 100 mA over-current.
EMC	EMC compliant. CE certification by NMi Certin BV. Number FLK95003. CFT dated on 3-Oct-95.
Power	Main instrument: Rechargeable NiCad battery with 10-12 hours typical battery life Standard remote unit: Replaceable 9V 425 alkaline cell
Size	22.5 x 13 x 7.6 cm (9 x 5 x 3 in)
Weight	1.5 kg (3.25 lb)
Languages Supported	English, Spanish, Italian, French, German, Portuguese, Chinese, Korean and Japanese

Fluke DSP-100
Digital Cable Meter Complete Specifications