The Factory Reconditioned compact ScopeMeter Fluke R-124/003 offers the rugged solution for industrial troubleshooting and installation applications. It's a truly integrated test tool, with oscilloscope, multimeter and "paperless" recorder in one affordable, easy-to-use instrument. When Used, find fast answers to problems in machinery, instrumentation, control and power systems. All Fluke factory reconditioned products come with the same warranty as a new Fluke product.

Dual-input measurement shows both meter reading and waveform at the same time. Click for larger imageA three-in-one toolDual-input measurement shows both meter reading and waveform at the same time today’s need of simultaneously The Reconditioned ScopeMeter 124/003 combines a 40 MHz dual input digital storage oscilloscope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument. Leave all other test tools behind, the Fluke 124003 ScopeMeter is the only tool you’ll need.

Click for larger image Check the starting capacitor of a motor using the ScopeMeter 123-003. One test lead measures allCheck the starting capacitor of a motor using the ScopeMeter 124-003 High frequency waveform, meter, capacitance and resistance-measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.

Open the measure menu and select from 26 scope and meter-measurements. Click for larger imageThe confidence to do a better jobOpen the measure menu and select from 26 scope and meter measurements Working under time pressure and in cramped or difficult to reach locations means you want to focus on the job at hand, not on the test tool in your hand. Which is why the Factory Reconditoned Fluke 124-003 ScopeMeter has Connect-and-View automatic triggering. You don’t have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.

Battery powered mobility

The Fluke 124/003 can be used up to seven hours on its battery, this frees you from mains outlets for true on-the-move working. The handheld format and the weight of just 1.2 kg, make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments.

Connect-and-View captures even the most complex motor drive signals. Click for larger imageFloating measurements, safety certifiedConnect-and-View captures even the most complex motor drive signals While conventional oscilloscopes can only make measurements referenced to power line ground, the ScopeMeter 124/003 makes floating measurements so there is no risk of an accidental ground short circuit when making a connection. The ScopeMeter 124-003 and the included shielded test leads are safety certified for measurements on 600 V CAT III industrial power systems. And using the VPS40 probe, measurements up to 1000 V CAT II re fully supported! Via the optically isolated RS-232 or USB interface, the ScopeMeter 124 can be safely connected to a printer for direct print-out or to a PC for later analysis and documentation using FlukeView software.