Phone 800-517-8431
HOME > USEDEQUIPMENT > FLUKE-RECONDITIONED > SCOPEMETERS > INDUSTRIAL-SCOPEMETER-123003-UR

Fluke R-123/003

*Factory Reconditioned* 20 MHz, 2 Ch, 25 MS/s, Industrial ScopeMeter

Same Warranty
as New Fluke Products!

Brand: Fluke
Model No: R-123/003
MPN: 4373393
Our Model No: 123003-UR
Condition: USED
PDF Document Icon Data Sheet (283 KB)
R-123/003
($1,499.99)
Sale $1,064.99
Please Call
  • 20 MHz Bandwidth, 25 MS/s
  • Two Channels, Scope or DMM mode
  • 5 mV to 500 V/div
  • 60 s to 20 ns/div
  • NTSC, PAL, SECAM video triggering
  • True-RMS DMM with 5000 count / 0.5% accuracy
  • 2 Channel TrendPlot for recording trends and intermittents
  • Optical RS-232 port for connection to PC's
  • Connect-And-View allows for quick hands-off operation
  • Improved Battery Charge Process
  • Lightweight (2.5 lb./1.2 kg.)
  • Fluke reconditioned products have the SAME warranty as new Fluke products.

The compact Factory Reconditioned ScopeMeter Fluke R-123/003 offers the rugged solution for industrial troubleshooting and installation applications. It's a truly integrated test tool, with oscilloscope, multimeter and "paperless" recorder in one affordable, easy-to-use instrument. Find fast answers to problems in machinery, instrumentation, control and power systems. All Fluke factory reconditioned products come with the same warranty as a new Fluke product.

A three-in-one tool

Dual-input measurement shows both meter reading and waveform at the same time today’s need of simultaneously The Fluke Factory Reconditioned 123/003 ScopeMeter combines a 20 MHz dual input digital storage oscilloscope, two true-RMS digital multimeters and a dual input TrendPlot™ recorder all in a compact, battery powered instrument. Leave all other test tools behind, the ScopeMeter 123003 is the only tool you’ll need.

One test lead measures all

Check the starting capacitor of a motor using the ScopeMeter 123-003 High frequency waveform, meter, capacitance and resistance-measurements as well as continuity checks are all covered by the shielded test leads. No time wasted finding or swapping leads. The included accessories allow hook-up at test objects of every dimension.

The confidence to do a better job

Open the measure menu and select from 26 scope and meter measurements. When used while working under time pressure and in cramped or difficult to reach locations, you want to focus on the job at hand not on the test tool in your hand. Which is why the ScopeMeter 123-003 has Connect-and-View automatic triggering. You don’t have to worry about triggering and instrument settings, and you have all the information on screen to do the job right.

Battery powered mobility

Up to seven hours of battery operation frees you from mains outlets for true on-the-move working. The handheld format and the weight of just 1.2 kg, make the instrument easy to carry and to fit comfortably in your hand. The rugged and drip proof case assures long life and reliable operation in the harshest industrial environments.

Floating measurements, safety certified

While conventional oscilloscopes can only make measurements referenced to power line ground, the ScopeMeter 123/003 makes floating measurements so there is no risk of an accidental ground short circuit when making a connection. The ScopeMeter 123-003 and the included shielded test leads are safety certified for measurements on 600 V CAT III industrial power systems. And using the VPS40 probe, measurements up to 1000 V CAT II re fully supported! Via the optically isolated RS-232 or USB interface, the ScopeMeter 123003 can be safely connected to a printer for direct print-out or to a PC for later analysis and documentation using FlukeView software.

Connect-and-View™ triggering for an instant, stable display

Connect-and-View captures even the most complex motor drive signals Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke’s unique Connect-and-View recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal – including motor drive and control signals – without you touching a button. Signal changes are instantly recognized and settings adjusted for a stable display. Benefit from the speed and convenience when measuring a number of test points in quick succession.

Use TrendPlot™ to help find intermittents, fast

Cursors and zoom help you analyze the captured TrendPlot The toughest faults to find are those that happen only once in a while: intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connectors. You may not be around to see it – your Fluke ScopeMeter 123003 will. In this “paperless” recorder mode, you can plot the minimum and maximum peak values and average over time – up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase – with time and date stamp – to help lead you to the cause of those faults quickly.

  • 1 x PM8907 Line Adapter/Charger
  • 1 x STL120 Shielded Test Leads Set
  • 1 x AC120 Alligator Clips
  • 1 x HC120 Hook Clips
  • 1 x BB120 Shielded BNC Adapter
  • 1 x User's Manual (CD-ROM)
  • 1 x BP120 1800 mAh NiMH Battery Pack
Data Sheet: PDF Document Icon (283 KB)
Manual: PDF Document Icon (1.9 MB)
↑ Back to Top