The Fluke Factory Reconditioned R-8808A 120V, 5.5 Digital Bench Multimeter delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency - all at superior accuracy and resolution with a basic VDC accuracy of 0.015 %. The Fluke Reconditioned 8808A is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do. All Fluke Factory Reconditioned products come with the same warranty as a new Fluke product.

Measure sensitive leakage current:

Typical multimeters use a shunt method to measure current, creating a measurement burden voltage that increases the error in low current measurements. This makes it difficult, if not impossible, to perform tasks such as determining the true leakage current on a battery-powered device while it is powered down, or measuring small currents in sensitive circuits. The Reconditioned Fluke 8808A is the only multimeter in its class to use a low-impedance operational amplifier and current-to-voltage conversion technique to eliminate the burden voltage and measure sensitive low currents. In this special mode, the Fluke 8808A Benchtop Multimeter can accurately measure small currents with a resolution of up to 100 nA.

Perform routine manufacturing functional tests with consistency:

Six setup buttons on the Reconditioned Fluke 8808-A front panel can be used like a car radio's station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time that measurement is used, you simply press the appropriate setup key. It's that easy!

The setup buttons eliminate the need to follow complex work instruction sheets. Operators no longer need to press multiple buttons to set up a measurement function and range, test limits, or enter other parameters to make a measurement.

Eliminate production mistakes:

Whether you are performing functional tests or making critical measurements on test points, using the limit compare mode with pass/fail indicators eliminates mistakes, especially those where results are "on the edge." The Fluke 8808A display has built-in enunciators that when used clearly show whether a test passes or fails. The pass/fail indicators take the guesswork out of testing: the result is either within limits or it's out!

Perform 4-wire measurements with only two leads:

Patented split terminal jacks for 2x4 Ohms function allow you to perform precise 4-wire low ohms measurements with only two leads instead of four. Optional test lead accessories are available to enable you to establish a 4-wire connection even in tight spaces or on surface mount devices.