<< UniSource DC Power Supplies
UniSource P6100
Triple Output Programmable Power Supply
|
- Triple Output : DC~+30V/3A, DC~-30V/3A Dual /
DC 5V/2A Fixed
- Overload voltage and Ampere Protection (SMPS)
- CC and CV Auto set
- Auto Tracking
- Key Lock to avoid error operation
- Setup : Setting and functions are selected
and stored in memory from the front panel. Eight
setups are stored in memory.
- Equipment : Display information about your
instrument including model number, serial number,
calibration date, GPIB address and firmware
revision.
- Remote Control : Built-in RS232C or optional
GPIB interface
- 128 by 64 pixel super twisted LCD display
- Power Source : 85V to 270VAC (±10%, 48 to
66Hz)
|
 
UniSource P6100 Shown
|
|
|
|
Channel |
3 Channel
(Two variable, One fixed) |
|
Output Voltage |
Voltage |
0 to +30V, 0
to -30V (Continuously variable)
Fixed 5V |
|
Current |
Dual 0 ± 3A,
Fixed 2A |
|
Resolution |
Voltage |
10mV |
|
Current |
10mA |
|
Operation Mode |
Constant
Voltage (CV) |
|
Constant
Current (CC) |
|
Ripple and Noise |
< 50mV rms |
|
Load Regulation
|
0.1% (at V =
15V, I = 1A) |
|
Line Regulation |
< 1mV / V |
|
Programming
Accuracy |
0.5% of value
± 3 digits |
|
Read Back Accuracy |
0.2% of value
± 3 digits |
|
General |
Power Source |
85V to
270Vac(±10%, 48 to 66Hz) |
Dimensions
/ Weight |
235(W) x
296(D) x 85(H) mm / About 2.5 kg |
Standard
Accessories |
Users Manual,
Test Probe, Line Cord, Spare fuse,
RS232 Cable and S/W |
Optional
Accessories |
GP-IB
(IEEE-488.2) Interface (Installed) |
|
|
|
|
)
