Test Equipment Depot Top Nav Bar
Test Equipment Depot - 800.517.8431 Free Ground Shipping Offer
<< Unisource Digital Multimeters

Unisource CEM-2200
Multi-Function Electrical Meter,
Discontinued

  • Digital graphic LCD and back-light display
  • Basic accuracy ±0.2%
  • Quick and precise response
  • Effective value measurement
  • Auto-power-off function
  • Ground resistance measurement with 3-point and 2-point (need option pack II)
  • IrDA communication
    (need optional S/W and USB-IrDA cable : IrDA-2000)
  • Leakage Current Measurement
    (need optional Clamp sensor : CPM-SN-300)
  • Lead wire connection status display
  • Auto/manual range selection function
  • Minimum value / maximum value / average value measurement
  • Calibration by the self-control key
Click here for larger image of the Unisource CEM-2200 Multi-Function Electrical Meter Click here for larger image of the AEMC L261 TRMS 600V AC/DC Simple Logger II
Unisource CEM-2200 Shown

Product Information
Datasheet 137 KB PDF
PDFPDF Help
 
 
Unisource CEM-2200 Specification
AC voltage
Measurement range
(Display range)
0 V to 750 V true RMS(0.0 V to 750.0 V)
Resolution 0.1 V
Accuracy ±0.5%+3counts
Measurement frequency characteristic 40 Hz ~ 1 KHz
DC voltage
Measurement range(Display range) 0 V to 1000 V (0.0 V to 999.9 V)
Resolution 0.1 V
Accuracy ±0.2%+2counts
Insulation
Test voltages and Insulation range 500 V / 1000MΩ, (+10%, -0%)
Resistance
Test voltages accuracy 500 V / 1000MΩ, (+10%, -0%)
Ground resistance (Earth)
Min. Resistance measurement value 0.35MΩ
Shorting measurement current 1.4mA max.
Measurement range (Display Range) 0MΩ to 10MΩ (0.00MΩ to 9.99MΩ)
10MΩ to 100MΩ (10.00MΩ to 99.99MΩ)
100MΩ to 1000MΩ (100.0MΩ to 999.9MΩ)
Resolution 0.01MΩ to 0.1MΩ
Accuracy (500 V) Accuracy (1000 V) ±2%+2counts (0MΩ to 10MΩ)
±2%+3counts (10MΩ to 100MΩ)
±2%+5counts (100MΩ to 1000MΩ)
Measurement method Using the 2 wire, 3wire measurement method
Open terminal Measurement voltage AC 20Vrms
Measurement frequency 1.2 KHz sine wave
Measurement current 2mA constant current
Measurement range (Display Range) 0Ω to 100Ω (0.00Ω to 99.9Ω)
100Ω to 1000Ω (100.0Ω to 999.9Ω)
1000Ω to 2000Ω (1000Ω to 2000Ω)
Resolution 0.01Ω to 1Ω
Accuracy ±2%+3counts (0Ω to 100Ω)
±2%+2counts (100Ω to 1000Ω)
±2%+2counts (1000Ω to 2000Ω)
Operating time
Ground resistance(EarthΩ) 3000 times 15-second measurements
Insulation resistance(MegaΩ) 5000 times 15-second measurements
AC current and Leakage current
Measurement range (Display range) 0Ω to 10KΩ (1Ω to 9999Ω)
0Ω to 40Ω continuity buzzer alarm
Resolution 1Ω
Accuracy ±2%+3counts
Temperature
Operating temperature -10°C to + 50°C / 14 ~ 122F, 20%~80% RH
Storage temperature -40°C to + 70°C / -40F ~ 158F
10%~90% RH with batteries removed
Temperature coefficient 0.10 x (specified accuracy)/ °C (< 18 ℃ or > 28 °C)
Other
Relative humidity Non condensing (less than 10°C)
80% RH (10°C to 30°C)
65% RH (30°C to 40°C)
45% RH (40°C to 50°C)
Without condensation
Live line meter (HOT) 70.00~750.0V Buzzer alarm and LCD display
Phase meter (PHA) AC 110.0V~750.0V / R.S.T GOOD, N.G LCD Display
Display Graphic LCD multifunction display, 9999 Counts
Communications IrDA Wireless communication to PDA and
PC 115,200 bps
Memory storage function 100 data ( # 00 ~ # 99) memory
Power supply Battery LR6 (AA), 5 pieces 1.5V alkaline
Dimensions 88(W) X 42(D) X 175(H) mm
3.46(W) X 1.65(D) X 6.89(H) inches
Weight Weight : 490g / 1.08 Ibs (Inc batteries )
368g / 0.81 Ibs (Exc. batteries)
585g / 1.29 Ibs (Inc. holster)
Power supply Battery LR6 (AA), 5 pieces 1.5V alkaline
Safety standards
Standard EN 61010-1, IEC 61010-1
Installation / Over voltage category CATII (1000Vdc, 750Vac) / CATIII (600 V)
Pollution degree Pollution degree 2
Certification CE, KS(Korea standard)
 
Ordering Information
Model Description Buy Online Price
CEM2200 Unisource CEM-2200 Multi-Function Electrical Meter Discontinued
Included Accessories
 
  • 1 - Test lead set
  • 1 - Set of Alligator clips
  • 1 - Holster
  • 5 - AA batteries
  • 1 - Instruction manual
Included
Optional Accessories
CEM2200PKII Unisource Ground resistance test lead set for CEM2200 Discontinued
IRDA2000 Unisource Communication Set with cable & program for CEM2200 Discontinued
CPMSN300 Unisource Clamp sensor for leakage current measurement for CEM2200 Discontinued
 

UniSource Catalog | UniSource Pricelist

$40.00 Minimum on Total Order