UniSource EDC-1630
Advanced Digital LCR Meter

0.02% ACCURACY, 5-MEASURING MODE
Displays measured deviation value and deviation rate (%) with respect to the designated standard values.
Displays automatic BIN numbers by optional setting according to the measured deviation rate.
If the D/Qppm key on menu-2 is used, resolution is obtained for even the ppm of D or Q.
If the # Average key on menu-3 is used, the number of measurements can be set up to 2~255 times to display the average values.
The system features handler interface function capable of controlling the BIN numbers and the measurement start signal of the measured data by means of remote control system.
The system carries a function which removes the stray capacity of the interface terminals or the line resistance offset prior to starting measurement.
Measuring Frequency 12Hz ~ 100kHz
4-Divided Accuracy and BIN Signal Output

UniSource EDC-1630 Shown

Product Information
Datasheet	301 KB
PDF Help

The UniSource EDC-1630 is a high-class digital LCR meter which displays menus and parameter values on a large LCD (100×77mm).

This is a multi-functional measurement mode LCR meter which is capable of measuring, with 0.02% accuracy, not only the general LCR but also the LR and CR circuit impedance characteristic. This equipment sets the deviation range up to 14 grades and automatically separates measured parts (LCR) by the BIN numbers so that the equipment can be used for the LCR mass production line or for subdivided parts inspection.

In addition to such function, the equipment measures the absolute deviation values with respect to the standard values and indicates deviation values (%), at the same time measuring the average values based on repeated measurements, reducing measurement errors at an equal level.

The UniSource EDC-1630 controls the BIN numbers of the measured data and the measurement start signals by remote control system using the handler interface function.

Measuring Function and menu selection concept

Menu Selection: More key can be used to choose 8 menus, and the mode is divided into Measure Mode and Special mode from here.

Function Selection: 6 Function keys can be used to select measuring functions

Resistance value measurement:	Resistance error (%) measurement:	BIN numbers of the measured value:

Displays general R (Resistance value) and the resistor’s Q (quality factor) values.	Displays error rate (%) of the measured value with respect to the optionally set NV (nominal value) reference value. Displays also error value with +/- mark. (Applicable also when L and C are measured)	To distinguish accuracy, numbers are assigned for each error grade optionally set based on nominal value. This means that Bin 0 is treated as the minimum allowable error limit; Bin 1 through Bin 13 as those grades that can pass; while Bin 14 is treated as the maximum allowable error limit in which case a message “Fail” is displayed on the bottom of LCD.
Inductance measurement:	Capacitance measurement I:	Capacitance measurement II:

Displays general L (Inductance Value) and L’s Q (quality factor) value.	Displays general C (Capacitance value) and R value contained in C.	Displays general C (Capacitance value) and C’s D (Dissipation factor) value.

Ordering Information
Model	Description	Buy Online	Price
EDC1630	UniSource EDC-1630 Advanced Digital LCR Meter		Sale $2,349.06 (Reg. $2,499.00)
Included Accessories
	RF Input Cable Test Clip AC Power Cable Instruction Manual	Included
Options
TF1630	UniSource TF-1630 Test Fixture for EDS-1630		$199.00

UniSource EDC-1630 Advanced Digital LCR Meter

Measuring Function and menu selection concept

UniSource EDC-1630
Advanced Digital LCR Meter