<< UniSource Function Generator
UniSource G 5100
15 MHz Programmable Sweep Function Generator
|
- 1Hz to 15MHz frequency output in 4 digits
resolution LCD display
- Waveform : Sine and Square wave (15MHz),
Triangle ad Ramp wave (100KHz)
- CW, BURST, SEWWP and TRIG. Mode
- DC Offset : -7.5V to +7.5V
- Direct display synthesis for excellent
stability
- Setup : Setting and functions are selected
and stored in memory from the front panel. Eight
setups are stored in memory.
- Equipment : Display information about your
instrument including model number, serial number,
calibration date, GPIB address and firmware
revision.
- Remote Control : Built-in RS232C or optional
GPIB interface
- 128 by 64 pixel super twisted LCD display
- Power Source : 85V to 270VAC (±10%, 48 to
66Hz)
|
 
UniSource G5100 Shown
|
|
|
|
Specifications |
Frequency
Characteristics |
Freq. Range |
1 Hz to 15MHz |
|
Resolution |
4 Digits |
|
Accuracy |
±(Set
Value * 0.5% +1 digit) |
Output
Characteristics |
Output waveforms |
Sine,
Triangle, Square, TTL rectangular, Step, etc |
|
Output range |
Max.
20Vpp (No load); Max.10Vpp into 50Ω |
|
Impedance |
50Ω ±
5% |
|
Attenuator |
0dB, 20dB< |
|
DC offset |
±7.5V
DC (No Load) |
Waveform
Characteristics |
Sine
Wave |
Freq. Range |
1Hz to 15MHz |
|
Amplitude |
Max.10Vpp (into an
Impedance 50Ω) |
|
Distortion |
<1.5% (10Hz to 100kHz) |
Triangle
Wave |
Freq. Range |
1Hz to 100kHz |
|
Linearity |
Better than 1% |
Square
Wave |
Freq. Range |
1Hz to 15MHz |
Rise & Fall
Time |
< 35nS (Maximum output) |
|
Symmetry |
20% to 80% |
Pulse
Wave |
Freq. Range |
1Hz to 15MHz |
Rise & Fall
Time |
< 35nS (Maximum output) |
|
Duty Cycle |
100nS to 10S |
Ramp
Wave |
Freq. Range |
1Hz to 100kHz
|
|
Linearity |
1% (1Hz~100kHz) |
SWEEP
Characteristics |
SWEEP Period |
9.95S to 0.05S |
|
SWEEP Range |
1:1 to 10:1 |
|
External SWEEP |
To be controlled by the VCF
input |
|
VCF Input |
Input Voltage |
±5V DC, maximum sweep
occurs at 5VDC |
|
Accuracy |
1% |
|
VCF Input Impedance |
Approximately 1kΩ |
|
TTL Output |
Level (TTL) |
Fixed amplitude,
< 0.4V: for a low “L”, and g> than 2.4V: for a high “H” |
|
Rise and Fall Time |
< 35nS |
|
FUNC Output |
Level (TTL) |
Variable Amplitude (Max.
10Vpp, Impedance 50Ω) |
|
General |
Power Source |
85V to 270Vac(±10%, 48 to
66Hz) |
|
Dimensions / Weight |
235(W) x 296(D) x 85(H) mm
/ About 1.5 kg |
|
Standard Accessories |
Users Manual, BNC cable,
Line Cord, Spare fuse,
RS232 Cable and S/W |
|
Optional Accessories |
GP-IB (IEEE-488.2)
Interface (Installed) |
|
|
|
|
)
PDF Help