|
Function |
Specification |
Output
Characteristics |
Waveforms |
Sine, Square, Triangle, Ramp, Pulse,
Sawtooth,
TTL/CMOS Leveled Square, DC |
|
Frequency Range |
0.1Hz to 10MHz in 7
Range (1,10,100,1K,10K,100K,1M) |
|
Frequency Accuracy |
± 5% of full scale |
|
Output Level |
20Vp-p in open circuit,
10Vp-p into 50Ω Load |
| DC
Offset Control |
More than ±5V (into 50Ω) |
|
Output Impedance |
20Vp-p in open circuit,
10Vp-p into 50Ω Load |
|
Attenuator |
-20dB fixed and
continuously variable |
Waveform
Characteristics |
Sine
Wave |
Flatness : ± 0.3dB to
10MHz
Distortion : Less than 1% at 0.2Hz to 100KHz |
|
Square Wave |
Rise and Fall time : Less
than 25nSec |
|
Triangle Wave |
Linearity : More than 99%
at 0.2 Hz to 100 kHz |
|
TTL Output |
Rise and Fall time : Less
than 20nSec |
|
Output Level :TTL Level(
H ≥ 2.4V, L ≤ 0.4V ) |
|
Symmetry Variation |
1 :1 to 10 : 1 |
Sweep Function
Characteristics |
Mode |
Linear |
|
Width |
Variable from 1 :1 to 100
: 1 |
| Rate |
0.5Hz to 50Hz(20mSec to
2Sec) |
|
External VCF Input |
Input Voltage 0 to 10V
|
|
Input Impedance : Approx.
10kΩ |
Frequency Counter
Characteristics |
Display |
7digit Green LED,
Overflow, Gate time, MHz, kHz, Hz |
| Frequency Range |
200mHz to 110MHz |
| Accuracy |
± Timebase Error± 1 Count
|
| Low
Pass Filter |
-3dB, 100kHz |
| Input Sensitivity |
100mVrms |
| Time
Base |
10MHz |
| Max.
Input Voltage |
250Vrms |
|
General |
Power Requirements |
115 or /230 VAC ± 10%, 48 to 66Hz
|
|
Operation Temperature |
0 to 50°C (Accuracy specified at 25 ± 5°C)
|
|
Standard Accessories |
Power Cord, BNC Cable,
Fuse, Instruction Manual |