|
Function |
Specification |
Output
Characteristics |
Waveforms |
Sine, Square, Triangle, Ramp, Pulse,
Sawtooth,
TTL/CMOS Leveled Square, DC |
| Frequency Range |
0.02Hz to 2MHz in 7 Range
(1,10,100,1K,10K,100K,1M) |
| Frequency Accuracy |
± 5% of full scale |
| Output Level |
20Vp-p in open circuit, 10Vp-p into
50Ω Load |
| Output Impedance |
50Ω ± 5% |
| Attenuator |
-20dB fixed and continuously variable |
Waveform
Characteristics |
Sine Wave |
Flatness : ± 0.3dB to 2MHz
Distortion : Less than 1% at 0.2Hz to 100KHz |
| Square wave |
Rise and Fall time : Less than 25nSec |
| Triangle wave |
Linearity : More than 99% at 0.2 Hz
to 100 kHz |
|
TTL/CMOS Output |
Rise and Fall time : Less than 20nSec |
TTL Output Level (H≥2.4V L ≤ 0.4V)
CMOS Output Level : 5 to 15V ± 1V |
| Symmetry Variation |
1 :1 to 10 : 1 |
|
Sweep Function Characteristics |
Mode |
Linear |
| Width
|
Variable from 1 :1 to 100 : 1 |
| Rate |
0.5Hz to 50Hz(20mSec to 2Sec) |
|
External VCF Input |
Input Voltage 0 to 10V |
|
Input Impedance : Approx. 10kΩ |
|
Frequency Counter Characteristics |
Display |
6digit Green LED, Overflow, Gate
time, MHz, kHz, Hz |
| Frequency Range |
200mHz to 50MHz |
| Accuracy |
± Timebase Error ± 1 Count |
| Input Sensitivity |
100mVrms |
| Time Base |
10MHz |
| Max. Input Voltage |
250Vrms |
|
General |
Power Requirement |
115 or 230 VAC ± 10%, 48 to
66Hz |
| Operating Temperature |
0 to 50°C (Accuracy specified at 25 ± 5°C) |
| Standard Accessories |
Power Cord, BNC Cable,
Fuse, Instruction Manual |