|
<<
UniSource Digital Training
Kits |
UniSource HBE-Opt-303
Optical Fiber Communication Trainer and Dual Light
Source (1310/1550nm)
|
- HBE-OPT-303 is an optical communication
practice device of the highest domestic level
- Can be utilized by all skill levels
- Can use a 2 channel oscilloscope
- Installed program that maximizes PC interface
communication and control of its main unit and
digital oscilloscope
- Can be applied to 20 kinds of specialty
optical devices
- Can be programmed, run manually, or both
|
 
Unisource HBE-Opt-303
Shown
|
|
|
|
HBE-OPT-303 is an optical communication practice device
of the highest domestic level. All levels of
specialists, from students to professionals, can operate
the trainer for basic optical tests or optical
communication system checks. This equipment can
utilize a digital oscilloscope of 2 channels and an
optical power meter function to test physical
specialized qualities, reaction principles, refraction,
total reflection, noise level, and damages associated
with optical communication elements, and confirm all
results without the need for expensive storehouse
measuring equipment.
The HBE-Opt-303 features exclusive software that
maximizes PC interface communication and control of its
main unit and digital oscilloscope. An input/output
signal analysis function is available, and other
functions like confirmation, saving of files, and output
is also available through use of mA, dB data
values of several forms, such as mW.
This optical fiber communication trainer can be
applied to 20 kinds of specialty optical devices. It can
also be applied to a 1310nm, 1550nm light source and a
basal light source for the optic parts of the lens. Used
on 650nm of thorn area and optical communication spot
experiments, qualities of the trainer applies MUX/DEMUX
characteristics that bend optical fibers to achieve a
diminution effect. The Visual Attenuator stores damaging
energy that results as a side effect from diminution
process with special optical fibers and a wave length
multiplex (WDM) element.
Our informative and multi-functional equipment
combines program-run and hands-on operation, and adds
input from the analog and digital I/O Port's multiplex
design. The design is built in with the program that
considers user based outside variations on the module. |
|
|
|
Item |
Description |
Specification |
|
Light Source |
FP-LD
(1310, 1550nm) - SM |
MQW-FP laser diode
module, Wavelength: 1310/1550um |
|
Built-in optical
isolator, InGaAsP monitor PIN photo diode |
|
10/125um
single-mode fiber pigtail with SC-PC connector |
|
FP-LD (650nm) -
MM |
Wave length 650 nm,
Package cable length : 25cm |
|
Optical output
power : 10mW (max) |
|
650nm wavelength
(Visual LD) , Light output power : more than
6dBm |
|
Uncooled operation
without TEC (Operation Room Temperature) |
|
Optical Detector |
InGaAs
PIN PD - SM @ 1.55uim wavelength |
Operation at
1.0~1.6uim, Low dark current (0.1nA), Low
capacitance, High responsiveness (0.9 A/W) |
|
InGaAs PIN PD - MM |
|
Diode |
Si, Ge |
|
Digital Control |
FPGA :
EP1K100QC208-3 (ALTERA) 100,000 logic gate |
|
Low-speed ADC :
8-channel, 12-bit 200kSPS ADC |
|
High-speed ADC :
1-channel, 12-bit 20MSPS ADC |
|
Parallel Interface
using ECP Mode, SRAM : 256K * 16 15ns |
|
Serial DAC :
8-channel 12-bit 1uS DAC |
|
Signal Input |
Internal |
Function Generator
: Frequency range : 10Hz~50kHz, Amplitude :
0V~5Vpp |
|
Wave Type :
Sinusoidal, Triangle, Square, User Digital, User
Analog |
|
External |
|
0V~5Vpp Analog &
Digital Port, MIC Input |
|
Signal Output
Terminal |
BNC, RCA, RS232C,
Parallel, Mini Jack |
|
Power Supply |
Input : 85~264Vac
50/60Hz, Output : 5Vdc (3/0.3A), +12Vdc (0.7A),
+3.3Vdc, +2.5Vdc |
|
Optical Devices |
Basic Devices
Provided |
Visual Attenuator |
|
Fixed attenuator
(5dB/10dB) |
|
WDM Set (MUX,
DeMUX-1310/1550nm) |
|
V-groove |
|
Hybrid Adapter Set |
|
Optical testing
instrument |
|
Single-mode Fiber |
|
Optical Test
Equipment set |
|
650nm Visual LD &
PD |
|
Multi-mode Fiber |
|
Multi-mode Coupler
±5 Vdc, 1.25W (Average) |
|
|
|
|
)
PDF Help