|
<<
UniSource Digital Training
Kits |
UniSource HBE-DTK-20K-240
Digital Logic Design Training and Measurement Kit
|
- Integration of Complex Circuits
- Design of One Chip Circuit
- Performance of the Basic ASIC Emulator
Function
- After designing the digital logic such as DSP
(filter), processor and controller with MAX+plus II
of ALTERA Ltd, it is possible to verify that its
operation is normal by downloading it to HBE-DTK-240
Board
- Multimode Configuration Method:
- Byte blaster: It is possible to check the
operation of a circuit by directly configuring the
designed circuit from PC to the device.
- PS (Passive Serial): It is possible to
program the serial ROM by the user first-hand and to
configure to the device directly by using the
programmed ROM.
- Includes 16 Input Frequencies: 80MHz, 40MHz,
20MHz, 16MHz, 10MHz, 8MHz, 5MHz, 4MHz, 2.5 MHz,
2MHz, 1.25MHz, 1MHz, 100kHz, 10kHz and 100Hz of
oscillator and 25.174 MHz of external clock for use.
|
|
|
|
|
HBE-DTK-20K-240 can make an inspection of DSP design,
FILTER design, Combinatorial Logic Design, Storage
Arithmetic Logic Design, and Logic motions as well as
the Basic Logic Circuit Practice using the basic
input/output device. |
|
|
|
Specifications |
| Device Name |
HBE-DTK-20K-240 |
| Gate Level |
20,000 Gate |
| Device
Internal Memory |
12,288 bit |
| Applied
Program |
Max+Plus II 9.1 |
| External
Memory |
RAM(256kbit), ROM(256kbit) |
| EEPROM |
Configuration Serial
EEPROM |
|
Input/Output Equipment |
Button switch, Bus Switch,
VGA Port,
RS232C Port, PS2 |
| Input
Frequency |
80MHz, 40MHz, 20MHz,
16MHz, 10MHz, 8MHz, 5Mhz, 4MHz, 2.5MHz
1.25MHz, 1MHz, 100KHz, 10KHz, 100KHz, External
Clock |
| Expansion
Port |
50pin x 2 |
|
I/O Interrupt Switch |
8 Pole Dip
Switch |
| Power
Source |
DC 5 V |
| Board
Size (mm) |
340 x 240 |
| Case
Size (mm) |
360 x 260 x 128 |
|
|
|
|
PDF Help