Triplett LVPRO30

Low Voltage Pro Multifunctional Cable & Network Tester with RJ45 & Coax ID Remotes, 10/100/1000 Detection

LVPRO30
LVPRO30

Triplett LVPRO30

Low Voltage Pro Multifunctional Cable & Network Tester with RJ45 & Coax ID Remotes, 10/100/1000 Detection

LVPRO30
LVPRO30

The Triplett LVPRO30 Cable/Network Tester Kit is able to run a variety of cable testing procedures including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication. The LVPRO Manager Software can be utilized to store up to 250 tests and print results.

  • Voltage Protection (AC/DC): 70/100V
  • Cable Tests: Opens, shorts, reversals, split pairs, wiremap, propagation delay, skew, ohms
$572.95 Price $699.99
This item ships FREE
In stock: 2 Units
  • Performs detailed wire map
  • Measures cable length and distance to open or short
  • Tests Coax and RJ11 cables for faults
  • Checks line voltage on RJ45 (PoE) and telephone lines
  • Measures incoming data speed 10/100/1000
  • Loads test batteries
  • Adjustable backlit display and detachable remote
  • Store up to 250 printable reports
  • Web upgradable for expanded functionality
  • Included Functions:
  • Cable Testing: Cable diagram, Pass/Fail, timing (delay, skew), and impedance (ohms)
  • Wall Jack ID: Locate multiple wall jacks for CAT5/6 and coax
  • Speaker Popper: Locate speakers by audibly "popping" them
  • SPKR 7.1 ID# Mapper: Map and label A/V speaker wires (requires remote kit, sold separately)
  • Port Blink Cable Detection: Locate cable connection to switch port by blinking switch's Link LED
  • Tone Cable Detection: Place tone on one end and detect it on far end (requires Remote Tone Probe, sold separately
  • Alert LEDs (Links, Volts): Two LEDs quickly alert you to an active switch connection or voltage on the line
  • Length: Measures cable length, distance to open or short; suitable for all wire types (use built-in VOP values or calibrate with your cable)
  • Return Loss Quality (RLQ): Tests for load mismatches that affect the wire's power and data transfer capability
  • 10/100/1000 Detection & Display: Plug into any active port (computer, switch, VoIP, access point) and display its capabilities
  • PoE / Pairs: Detect PoE voltage and display its amplitude and location on the cable (midspan, endspan or both)
  • CCTV / Vpp (peak to peak voltage): Measure and display Vpp of video signal
  • Phone: Display voltage and cable location (up to 4 phones); detect central office telephone connections
  • Loaded Battery Test: Test alarm system and other backup batteries by doing a loaded battery test

The Triplett LVPRO30 Low Voltage Pro Multifunctional Cable & Network Tester with RJ45 & Coax ID Remotes is capable of running a variety of cable testing procedures, including Cable Map, Ethernet Switch Port Blink, Speaker Pop, Cable Length, PoE Volts, Battery Test, and 10/100/1000 indication. The LVPro can store up to 250 results for later printing and features an adjustable backlit display as well as the capability to attach Test Modules. The LVPro is compatible with speaker cable, coax, alarm cable and Category cable (CAT5,6); furthermore, if you have a unique cable, the LVPro has adjustable VOP, a technology that allows it to be tuned to your cable.

More Information
Country of OriginUnited States
BrandTriplett
ConditionNEW
UPC614395003845
Vendor AliasLVPRO30
  • 1 - LVPRO Main Unit
  • 1 - Detachable Remote
  • 10 - RJ45 Remotes
  • 10 - Coax Remotes
  • 3 - RLQ Adapters
  • 1 - Set of Smart Remotes
  • 1 - F Male to BNC Male
  • 1 - F Male to BNC Female
  • 2 - RJ45 Patch Cables
  • 1 - RJ45 to Alligator Clip Adapter
  • 1 - USB Cable
  • 4 - AA Batteries
  • 1 - User Manual