<< Trilithic Catalog
<< XProTec Cable Mappers
|
Trilithic 2011337000
XProTec 20 Way Cable Mapper |
- Tests Wire Continuity for Open/Short Conditions and Voltage
- Independently Identifies up to 20 Individual Cables
- Shows Open/Short and Voltage Results with Simple Red Numeric Display
- Auto Power On and Off Function
|
 
XProTec 20 Way Cable Mapper
Shown
|
|
|
| |
| The XProTec™ 20-Way Cable Mapper is a hand-held device designed for CATV and security system installers who test multi-run coaxial cable systems terminated with F-type connectors; coaxial cable runs to a central bundle; or speaker and security alarm cables. It can identify up to 20 terminated cables. With 20 individual remote terminators, it’s ideal for mapping networked coaxial installations.
|
| |
| Specifications Trilithic XProTec 20 Way Cable Mapper |
| Display |
High-intensity red LED display to indicate status for each of 20 cables tested |
| Auto Power On |
Automatically powers on when connected to a condition other than an open circuit |
| Auto Power Off |
Powers off after disconnect from cable |
| Maximum Cable Length |
4000’ (1219 m) |
| Maximum DC Cable Resistance |
100 Ω |
| Power |
(3) 3V CR2032 Li-Mn “button cell” batteries |
| Weight |
3.2 oz. (91 g) |
| Dimensions (H x W x D) |
4.85” x 1.28” x 0.83” (123mm x 33mm x 21mm) |
|
| |
)
PDF Help