 
Trilithic STE-1200 Shown |
|
|
- 3.5 Inch TFT LCD, 960 x 240 Resolution
- 12 VDC, 1A Power Output for Camera
- Audio Input Testing
- Supports Pan-Tilt-Zoom Control for More than Twenty PTZ
- Protocols
- Automatically Adapts and Displays Video from NTSC or PAL Cameras
- PAL or NTSC Multi-System Colorbar Video Generator
- Captures and Analyzes RS232 and RS485 Controlling Data
The Trilithic STE-1200 CCTV Security Tester from XFTP by
Trilithic is used for the installation and maintenance of closed
circuit video monitoring systems. The unit can be used to display
video feeds directly from security cameras, control the movement of
Pan-Tilt-Zoom (PTZ) cameras, generate colorbar test images, capture
addressing data from serial control systems, and test LAN cables.
These functions along with easy operation and portability makes
it simple for a CCTV Technician to install and maintain CCTV
systems, improving work efficiency by reducing time in the field.
|
|
The Trilithic STE 1200 makes adjustments to PTZ controllers quick and
simple. Support for more than 20 PTZ protocols such as PELCO and
Samsung allow for easy adjustments. These adjustments include
zooming, panning, tilting, adjusting focus, and creating preset
positions for security cameras. Live video can also be displayed and
generated in both NTSC and PAL formats.
The Trilithic STE1200 can be used to capture and analyze data from RS485
cable. It can also test cable in local area networks by displaying
the connection status, sequence, and cable number. The STE-1200 is
capable of baud rates ranging from 150, and 600 to 19200 bps along
with support for RS232, RS485, and RS422 interfaces.
|
Connection Diagram
The following diagram shows an example of how the STE-1200 CCTV
Security Tester is used to test a CCTV security system. This example
shows a typical PTZ camera with video output, PTZ control wiring (RS232
or RS485), audio output, and DC power supply.
In this example, the security camera is supplied power using the
STE-1200 power output. This configuration is common in new installations
where power may not be available for testing. In existing installations,
the security camera can be powered by the installed power source.
|
| Specifications |
| Video Testing |
| Signal Mode |
NTSC/PAL seven system, auto-adapting |
| Display |
3.5 inch digital TFT-LCD, 960 x 240
resolution |
| LCD Adjustment |
Brightness, Contrast, Saturation |
| Video Input |
Female BNC |
| Video Output |
Female BNC |
| Video Output Mode |
1.0 Vp-p |
| Signal Generator |
PAL or NTSC multi-system colorbar
video |
| PTZ Controller |
| Communication |
RS232, RS422 (simplex) and RS485 |
| PTZ Protocols |
24 Protocols - AD, ALEC, CBC, DAT-SD,
DH-YTC06, Fastrax, LC-NEW, LG-MULTIX, Lilin-FAST,
Lilin-MLP2, Minking A01, Minking B01, Molynx, Panasonic,
PEARMAN, Pelco D, Pelco P, Samsung, SONY-EVI, VCltp, Vicon,
WV-CS850, YAAN, and YANN-0 |
| Baud Rate |
150, 300, 600, 1200, 2400, 4800, 9600,
19200 bps |
| Network Testing & Analysis |
| Tests |
Connection status and ID, cable type,
wire sequence, and data |
| Cable Type |
Unshielded Twisted Pair (UTP) |
| Status |
Serial numbered cable tester |
| Wire Sequences |
Straight, cross-over, short, and open |
| Data |
Captures and analyzes RS-485 control
data |
| Audio Testing |
| Audio Input |
Mini-jack (1/8” TRS) |
| Audio Output |
Internal speaker |
| Power Specifications |
| Battery |
3.7 V, 3000 mAh
Li-Ion battery |
| Input |
5 VDC, 2A |
| Output |
12 VDC, 1A power output for camera |
| Operation Time |
Up to 12 hours |
| Charge Time |
3 to 4 hours |
| General Specifications |
| Temperature |
-22 to 158 °F
(-30 to 70°C) |
| Humidity |
30% to 90% RH |
| Dimensions |
6.93 x 3.70 x
1.42 inches (176 x 94 x 36 mm) |
| Weight |
0.75 lbs (340 grams) |
|
)
PDF Help)
