Transmation 23409T
CheckMate 400 T/C Calibrator: J,K,T,E; 1°C Accuracy

Transmation Checkmate 400 Shown   Product Information Datasheet 135 KB PDF Help

• Calibrate Thermocouple Instruments—
  Check transmitter inputs
  Simulate sensors into controllers and indicators
  Read thermocouple probes
• Four Built-In T/C Types—
  Types J, K, T, E and millivolts
  Built-in cold junction compensation
• Compact and Low Cost—
  The CheckMate 400 fits easily into your pocket and budget
• Easy to Use—
  One touch to set the output and function
• Accuracy to ±0.025%—
  Within ±1°C
• Long Lasting Alkaline batteries—
  Four "AA" Alkaline cells can provide months of typical use
• Settable "Quik-Chek®" Pushbuttons—
  Set any HI and LO output an each range

Simulate temperature and measure thermocouples directly with the pocket sized CheckMate 400.

The CheckMate 400 is easy to use. Select a thermocouple type and use the decade push-buttons for the precise output you need.

Calibrate recorders, digital indicators, computer inputs or any other instruments that measure thermocouples. Easily set any value to 1°C or F with the intuitive UP and DOWN pushbuttons. Separate buttons for each digit make adjustments fast and easy.

The "Quik-Chek" pushbuttons provide rapid checking of and three points in each range. Quik-Chek settings remain in memory even when the CheckMate 400 is powered off.

Verify proper sensor function and measure temperatures by attaching a thermocouple to the CheckMate 400. Toggle the display between °C and °F or configure it for full time use of either temperature scale.

Display the present reading, maximum or minimum by pressing the READ, MAX or MIN pushbuttons to quickly check how much the temperature has varied or the stability of control.