<< Tektronix Waveform Monitors and Vectorscopes

Tektronix WFM6120 · WFM7020 · WFM7120
Multi-Standard, MultiFormat Waveform Monitors

Tektronix WFM7120 Shown

Product Information
Datasheet	221 KB
Comparison Chart	4.73 MB
Options Guide
Ordering Info
PDF Help

Features:

Used for Monitoring And Compliance Checking In Video Distribution And Broadcasting, Quality Control In The Video Production And Post Production, and Equipment Qualification And Troubleshooting In The Installation And Maintenance
Of Video Facilities And Systems
Simultaneous A/B Input Support Extends Monitoring Functions (SIM Option)
Full Dual Link Support For High-End Production, Post Production and Manufacturing Applications (DL Option)
Numerical And Graphical Display Of A/V Delay (AVD Option)
The WFM7020 and WFM7120 Support HD, SD, And Composite Video Formats
FlexVu™ XGA Display Increases Productivity
CaptureVu® Video Frame Capture (WFM7120 only)
Exclusive Tektronix Gamut Displays Help Ensure Compliant Content
Patented Timing Display Simplifies Plant Timing
Lightning Display Is Ideal For Maintaining Correct Inter-Channel Timing
Extensive Fault Monitoring, Status Reporting, And Error Logging Simplify Content Quality Control
Standard And User-Definable Safe Area Graticules Help Avoid Errors And Rework In Editing And Format Conversion
Front Panel USB Port For Easy Storage And Transfer
Network Access And Control Supports Remote-site Monitoring
Fully Digital Processing For Accurate, Repeatable, Drift-Free Operation
Audio Control Packet Provides A Decoded Display Of The Embedded Audio Information
System Upgrades Can Be Done Over The Network Or Via USB

WFM6120
The SD-capable WFM6120 offers high performance monitoring and measurement capabilities. It can be configured to monitor either NTSC/PAL analog video (Opt. CPS), SD Digital Video (Standard), or both video formats. Available audio options offer support for monitoring digital audio (embedded and AES/EBU inputs), analog audio, and Dolby audio formats. Available measurement options offer in-depth digital data analysis and SDI signal measurements, such as Eye diagrams and jitter as well as in-depth video data and ancillary data analysis (Opt. DAT). AV Delay Measurement capability (Opt. AVD) can also be added to the WFM6120.

WFM7020
The HD-capable Tektronix WFM7020 offers basic monitoring capabilities for applications involving HD digital video. It can be configured to monitor NTSC/PAL analog video (Opt. CPS), SD Digital Video (Standard), HD digital video (Opt. HD) or any combination of these video formats. Available audio options offer support for monitoring digital audio (embedded or AES/EBU inputs) and analog audio. Dual Link (Opt. DL) is also available on the WFM7020.

WFM7120
The HD-capable Tektronix WFM7120 offers high performance monitoring and measurement for applications involving HD digital video. It combines the video and audio monitoring capabilities available on the WFM7020 with available support for Dolby audio (Opt. DDE), in-depth data analysis (Opt. DAT), and SDI signal measurement as well as AV Delay Measurement (Opt. AVD). The WFM7120 also supports Simultaneous A/B Input Monitoring (Opt. SIM) as well as DUAL Link Monitoring (Opt. DL).

Flexible Configurations And Upgrades
To help address the challenges of maintaining both legacy analog and emerging digital video technology during the digital transition, the WFM7020 and the WFM7120 offer an exceptionally broad range of options and upgrades. Video monitoring, audio monitoring and measurement options can be added to a previously purchased instrument with field installable upgrades.

CaptureVu can compare captured data and live signal on multiple displays	CaptureVu The CaptureVu capability on the WFM7120 can capture and store the video data from an entire video frame and display this data on waveform, vector, gamut, and picture displays. Unlike "freeze" captures, you can compare the live signal to capture data in one kind of display, and then reconstitute the same data to make the same live-to-capture comparison in a different display.

In addition to user-initiated capture, the instrument can do a triggered capture that automatically acquires data on the occurrence of specific faults. Triggered captures are particularly useful for finding intermittent errors and in capturing data about fault conditions at remote sites. CaptureVu then let's you use a variety of displays and settings to investigate the problem. With CaptureVu, you can store a video frame generated by one piece of equipment and use this as a reference to configure other equipment to have matching video characteristics. The data can also be stored on a USB memory device and transferred to another instrument or saved to a PC and provide further detailed analysis using the CaptureVu Utility.

Use FlexVu to create the multi-view display that best fits your needs.

FlexVu
The WFM7020 and the WFM7120 models have an integrated, XGA-resolution display with the Tektronix FlexVu user interface. With FlexVu, you can combine separate monitoring and measurement displays four at a time, in almost any combination. FlexVu lets you create a multi-view display best suited to your specific needs and work practices

An SDI signal status display summarizes key signal parameters. This includes signal strength, cable loss and cable length based on the user-selected cable type. With FlexVu, you can simultaneous display timing and alignment jitter values, cable parameter measurements and different Eye Patterns to help quickly diagnose and resolve problems related to SDI jitter or cable attenuation.

Waveform and Vector displays.

Waveform Displays
Video waveform displays can show digital video signals in RGB, YPbPr, YRGB, or composite formats with flat or low-pass filtering. Waveform displays or composite analog video signals can show NTSC and PAL signals with luma, chroma, and luma+chroma filtering. Signal components can be displayed in either parade or overlay mode, and in composite format displays with setup selection.

The waveform display has several sweep rates and easy control of vertical gain and horizontal magnification to help you efficiently monitor and measure video waveform parameters. With FlexVu you can see four differently configured waveform displays of the same signal. With the Simultaneous Input Option different signal sources can be compared side by side.

Vector, Lightning, and SCH Phase Displays
The vector display offers user-selectable graticules, color targets (75% and 100%), and color axis. The Tektronix Lightning display shows luma and chroma amplitudes and lets the user verify component inter-channel timing using a color bar signal. The SCH Phase display helps quickly verify this critical timing parameter of composite analog video signals

Quickly detects Gamut errors using specialized displays.	Tektronix Exclusive Gamut Displays	top >
	The patented Tektronix Diamond, Split Diamond and Arrowhead gamut displays simplify the process of verifying gamut compliance. The Split Diamond display helps easily identify and correct RGB gamut errors in digital video signals. The Arrowhead display saves time in verifying the gamut compliance of the composite video signal generated from a digital video signal. With FlexVu you can simultaneously monitor both gamut displays to quickly gain complete confidence in content compliance throughout the delivery chain.

Timing Display
The patented Tektronix Timing display makes facility timing easy through a simple graphical representation which shows the relative timing of the input signal (the circle) versus the reference signal (the crosshair).

For proper timing, the circle is centered on the crosshair and changes color from red to green. The display also has numeric readouts of the timing difference relative to the reference signal, showing vertical timing as number of lines and horizontal time difference in μsec. With the SIM option Analog to Digital Timing of the input signals or Digital to Digital timing is also possible.

SIM Module allows Digital-To-Digital
and Analog-To-Digital Timing

Timing Display Showing A& B LinkTiming with DL Opt.

Picture display with Closed Caption,
Safe area graticules and gamut brightups

Picture Displays
A full-color picture display shows the video content of the monitored input. The instrument can display the picture on the full-screen, or on up to four views in a multiple-view display. For different input formats, the picture display automatically adjusts to show the full image content. The picture display can also show content advisory codes and decoded closed caption data (EIA608 Formats) for easy verification of this critical ancillary data.

Editors can choose from several Safe Area graticules on the picture display to quickly verify correct placement of graphics, titles, or logos. Graticule choices include the Safe Action and Safe Title Graticule defined in the SMPTE, ITU, and ARIB standards, plus custom, user-definable graticules. Using FlexVu, editors can see two or more pictures with different graticules to verify correct placement for different formats and standards.

The user can also select brightup conditions that show the location of RGB or composite gamut errors on the picture display. Line and sample brightups show the location of the currently selected line or video data sample. The Blanking mode provides a quick check as to whether ANC Data is present.

	Alarms, Quality Statistics, and Logging All models offer a variety of displays for status at a glance signal monitoring and quick, thorough content verification. Using the alarm status display, operators and technicians can quickly detect video faults including gamut, EDH, and CRC errors, SDI format problems, and many more. The instrument offers several alarm notification methods, including on-screen error icons, audible beep, ground-closure output, and SNMP traps.
Alarms, status, quality logistics, and logging.
For verifying and documenting content compliance, the Video Session display shows key status information on the signal plus quality statistics like errored seconds and percentage content with errors. To support unattended monitoring, and to supply documentation for maintenance records or service level agreements, the instrument logs alarms and other key events (such as format changes). Log entries can be time-stamped with date, time-of-day, and time code reference (VITC, ATC or LTC). All models also offer extensive ancillary data monitoring. This includes monitoring the presence of closed caption content formats defined by EIA608, EIA708, and ARIB standards. With the Simultaneous Input Option Error Logging from the dual inputs is combined in a single error alarm display with the source of the error indicated in the status bar.

Audio Monitoring
The WFM7020 and the WFM7120 offer several options for monitoring both analog and digital audio. Both audio options support the display of Dolby presence and have an audio bar display that can display up to six audio bars for analog inputs, up to eight audio bars on AES/EBU inputs and embedded audio sources. Up to ten audio bars are displayed when decoding Dolby Digital and Dolby E formats (DDE Option only).

Audio bars and Surround Sound Displays

top >

The audio options provide user-selectable scales, meter ballistics and audio level indicators. In-bar messages show status and fault conditions for each monitored audio channel, reducing the likelihood of an undetected audio problem. Audio phase displays include phase correlation meters, a flexible Lissajous display (for any pair of channels), and a multiple-channel Surround Sound * display that shows audio levels (A-weighted or linear), total sound volume, phantom source locations, and the dominant sound position

The Audio Session display shows audio error conditions (such as parity errors), Loudness (Leg) as well as highest true peak, and the number of detected, clips, mutes, over-levels and silences. User-specified threshold values determine over-level and silence conditions and the duration a potential audio problem must persist before the instrument generates an alarm.

In addition to monitoring audio inputs, these options can generate analog or digital audio outputs from the analog or AES/EBU audio inputs. They can also generate audio outputs from embedded audio in the video input, or by decoding Dolby audio inputs, including stereo down-mixes. A convenient front-panel headphone connector lets you listen to any stereo audio output.

The audio options can be used to de-embed audio from the SDI signal and output as digital or analog audio depending on the option installed within the instrument. Additionally the audio option can be configured to output digital or analog audio from the selectable inputs or from the decoded Dolby data stream.

With the available Dual Link (Opt. DL) a total of 8 Audio Channels can be monitored from the total of up to 32 embedded audio channels. In the Simultaneous (SIM) option two audio tiles can be displayed with a flexible configuration of 8-0, 6-2, 4-4, 2-6 and 0-8, a total of 8 audio channels can be displayed in this option.

Simultaneous A/B Inputs
This option allows two input signals to be monitored simultaneously allowing operation staff to quickly determine if a video quality problem existed in the input signal, or arose within their facility. Engineering staff can quickly detect, isolate, diagnose, and resolve technical problems introduced by a piece of video equipment or a video equipment chain by quickly comparing the input and output signals. This is especially helpful when checking for transparency during format conversion.

Simultaneous Inputs

Flexible configuration of displays from two monitored inputs, including waveform/picture and waveform/audio
Simultaneous fault detection, status reporting, alarm generation and error logging
The Patented Tektronix Timing Display can be used for facility timing allowing each source to be measure, either to an external reference or to the other input signal
Audio and Video Sessions are independent for each channel
The SIM option also allows Digital-to-Digital or Analog-To-Digital Timing
By using the Saved Offset you can save the timing from one signal and then show the relative timing between the current signal and the saved offset

Dual Link
The WFM7120 Dual Link option allows high end production facilities, post houses, and equipment manufacturers to seamlessly use all the basic monitoring functionality they are already comfortable with in SD/HD-SDI when working with Dual Link signals, allowing users to seamlessly transition from HD/SD-SDI to Dual Link

Full Dual Link

SMPTE 372M Compliant

Automatic configuration using SMPTE 352M Video Payload ID
Waveform, Vector, Gamut, Picture, Timing, Status Displays
Most Monitor Operations are the same as normal HD/SD-SDI monitoring
Both inputs are automatically combined and timing differences between the A & B link are automatically compensated for
Timing Measurement shows Link B to Link A Timing
Selectable Display of Alpha Channel if present in picture mode or WFM traces
Embedded Audio in both links can be monitored for presence but the number of channels the user can display does not change

top >

Format	Sample Structure	Frame/Field Rates
1920 x 1080	4:2:2 YCbCr 10-bit	60, 60/1.001, and 50 progressive
	4:4:4 RGB 4:4:4:4 RGB+A 10-bit	30, 30/1.001, 25, 24 and 24/1.001 progressive, PsF 60, 60/1.001, and 50 fields interlaced
	4:4:4: RGB 12-bit
	4:4:4 YCbCr 4:4:4:4 YCbCr+A 10-bit
	4:4:4 YCbCr 12-bit
	4:2:2 YCbCr 12-bit
	4:2:2:4 YCbCr+A 12-bit
2048 x 1080	4:4:4 RGB 10-bit	30, 30/1.001, 25, 24 and 24/1.001 progressive, PsF
	4:4:4:4 RGB+A 10-bit
	4:4:4 RGB 12-bit
	4:4:4 YCbCr 10-bit
	4:4:4:4 YCbCr+A 10-bit
	4:4:4 YCbCr 12-bit
	4:2:2 YCbCr 12-bit
	4:2:2:4 YCbCr+A 12-bit

AV Delay
The Tektronix AV Delay Measurement is intended for out of service use as part of a normal installation or maintenance process. This option gives the installer or maintainer an added dimension of testing to insure complete system integrity. The combined graphic and numeric readout accommodates a variety of needs for ease of use, speed and precision

AV Delay Measurement

The AV Delay Measurement uses the unique video and audio sequence available in the TG700 HDVG7/DVG7 Modules with A/V Timing Mode enabled
The graphical display provides a distinctive zero reference indicator and the A/V measurement indicator visually aligns with this reference indicator when the system under test has neither advanced nor delayed the test signal's audio component relative to its correct temporal position
The instrument can measure up to ±150 video fields of variation from the audio signal's correct temporal location in the test signal
AV Delay results are displayed in units of milliseconds and fields
The A/V delay measurement has a resolution of 1 video field
A/V delay accuracy is ±1 video field

SDI Signal Measurement And Data Analysis
The WFM6120 and WFM7120 offer options for monitoring and measuring SDI signal parameters:

For basic SDI signal monitoring, Option EYE has Eye pattern displays, plus readouts of jitter and cable length measurement parameters
For more complete SDI signal measurement, Option PHY has all the capabilities of the EYE option plus a jitter waveform display and automated Eye parameter measurements

3-Eye, 20-Eye, and Jitter waveform

When used with the WFM7120, Options EYE and PHY measure both SD-SDI and HD-SDI signal parameters. Both the EYE and PHY options can display Eye Patterns in 3-Eye, 10-Eye (SD-SDI), or 20-Eye (HD-SDI) mode. These displays include cursors to manually measure Eye parameters and user-selectable clock bandwidths to help isolate jitter components. Option PHY automatically measures Eye amplitude, rise-time and fall-time. Both options use a phase demodulation technique with selectable filters to continuously monitor and measure the peak-to-peak (p-p) amplitudes of timing and alignment jitter related to video field rates

An easy-to-interpret jitter gauge augments the numeric jitter readouts. The jitter waveform display available with Option PHY lets engineers examine signal jitter in greater detail related to the video line and field rates with selectable filter bandwidths (10Hz-100kHz) for Timing and Alignment jitter.

An SDI signal status display summarizes key signal parameters. This includes signal strength, cable loss and cable length based on the user-selected cable type. With FlexVu, you can simultaneous display timing and alignment jitter values, cable parameter measurements and different Eye Patterns to help quickly diagnose and resolve problems related to SDI jitter or cable attenuation.

To help efficiently detect and diagnose errors in digital video data, the WFM7120 offer Option DAT, containing a color-coded data word display, logic waveforms of the video data, and a display of data words in user-specified ancillary data packets

top >

Signal Inputs and Outputs, Peripherals, Communication
The digital video options (SD Standard) and (HD Opt.) have two SDI inputs and a switched output of the selected input signal. The analog video option (Opt. CPS) has two composite analog video inputs with passive loop-though outputs. The instrument senses the input format and automatically configures the required settings. It will signal a format mismatch if the applied external reference format is not compatible with the input signal

The front-panel USB port makes it easy to store captured data or instrument settings on a USB memory stick and transfer this information to another instrument. All models have a 10/100Base-T Ethernet connection and offer remote access and control with a standard Web-browser. You can use this interface to download presets and error logs, or print the screen contents for easy record keeping

For simple remote control, a ground-closure type remote interface can indicate an alarm condition or execute instrument presets. An SNMP interface allows easy integration with network management software.

Options Guide
Option Code	Option Type	Description	WFM6120 Compatible	WFM7020 Compatible	WFM7120 Compatible
SD	Video	Support for monitoring SD Definition digital video formats, two auto-sensing SDI inputs with switched output of selected input.	Standard	Standard	Standard
HD		Adds support for monitoring High Definition digital video formats, two auto-sensing SDI inputs with switched output of selected input.	-
DL		Adds Full Dual Link Support. To add this, it requires a HD Option.	-
CPS		Adds support for monitoring NTSC/Pal composite analog video, two inputs with passive loop through outputs.
AVD		Adds support for AV Delay Measurements (Requires signals provided from the TG700 with either the DVG7 or an HDVG7module with A/V Timing Mode enabled.).		-
SIM		Simultaneous Input Option (adds support for simultaneous monitoring up to two SDI inputs or one SDI input and one CPS Input).	-	-
AD	Audio	Supportsand monitors AES/EBU and analog audio formats up to 12 analog audio inputs and up to eight analog audio outputs. The DDE Option supports up to 16AES/EBU input channels and up to eight AES/EBU output channels. All audio options can output to the front-panel headphone port.
DDE	Audio	Adds monitoring capabilities for Dolby Digital (AC-3) plus supports for monitoring and decodes Dolby E as well as all the audio formats included in Option AD. It also allows decode of the Dolby audio formats and place a status message in the appropriate audio bar, eliminating confusion about audio input formats. Dolby status displays offer in-depth review of decoded Dolby metadata.	-	-
EYE	Eye/Jitter and Data Analysis	Add support for Eye diagrams, jitter measurement, cable parameter measurements.		-
PHY		Add capabilities available on Option EYE, plus jitter waveform and Eye parameter measurements.		-
DAT		Add in-depth video data and ancillary data analysis.		-

top >

Ordering Information
Model	Description	Buy Online	Price
Rackmount or Cabinet Sold Separately
WFM6120	Tektronix WFM6120 Advanced Waveform Monitor Base Unit, SD standard		$8,500.00
WFM7020	Tektronix WFM7020 Waveform Monitor Base Unit, HD Capable		$9,000.00
WFM7120	Tektronix WFM7120 Advanced Waveform Monitor Base Unit, HD Capable		$11,500.00
Included Accessories
	User Manual 12V wall unit power adapter, North America Carrying Pouch	Included
Optional Accessories
1700F00	Tektronix 1700F00, Plain cabinet; For 1/2 Rack 1700 Series Safety Controlled		$140.00
1700F02	Tektronix 1700F02, Portable CAB; Incl Handle, Feet, Tilt Stand, Safety Controlled		$370.00
1700F06	Tektronix 1700F06, Filler Panel		$265.00
1700F07	Tektronix 1700F07, Drawer; Half Rack, Fits WFM7F05 Dual Rack Cabinent		$460.00
WFM712006	Tektronix WFM712006 Filler Panel for Dual Rack Cabinet		$240.00
WFM6120 Options
Must be added at time of Main Unit Purchase! If product is required after unit is purchased Please Call
WFM612062	Tektronix WFM612062 Analog Audio Breakout Cable, 6 feet, male 62-pin connector to 8 Xlr Male Output Connectors and 12 XLR Input Female Connectors		$725.00
WFM6120AD	Tektronix WFM6120AD Add Option DS Capabilities plus Analog Audio Monitoring (2 sets of 6 Channels analog inputs; 8 Channels analog audio Outputs)		$2,700.00
WFM6120AVD	Tektronix WFM6120AVD Add support for out-of-service A/V Delay Measurement		$1,500.00
WFM6120BAS	Tektronix WFM6120BAS Add Basic Option Bundle (including support for SD, HD, CPS, SIM, and AD) to the WFM7120 Advanced waveform Monitor		$2,700.00
WFM6120CPS	Tektronix WFM6120CPS Add Support for Composite Analog Video Monitoring; 2 Composite Analog Inputs; Passive Loopthrough		$2,100.00
WFM6120DAT	Tektronix WFM6120DAT Add Advanced Data Analysis Capabilities		$2,000.00
WFM6120EYE	Tektronix WFM6120EYE Add Eye pattern, Jitter Measurements, and Cable Parameters Measurements		$2,400.00
WFM6120PER	Tektronix WFM6120PER Add Performance Option Bundle ( Includes Support for SD, HD, CPS, SIM, And DDE) To the WFM7120 Advanced Waveform Monitor		$5,500.00
WFM6120PHY	Tektronix WFM6120PHY Add Option Ey Capabilities plus Jitter Waveform and Automated Eye Measurements		$4,100.00
WFM7020 Options
Must be added at time of Main Unit Purchase! If product is required after unit is purchased Please Call
WFM702062	Tektronix WFM702062 Analog Audio Breakout Cable, 6 feet, Male 62 Pin Connector to 8 XLR Male Output Connectors and 12 XLR Female Input Connectors		$725.00
WFM70203G	Tektronix WFM7020 3G Add Support for 3Gbps Single Link SDI Signal Formats (MUST Order Option HD)		$10,000.00
WFM7020AD	Tektronix WFM7020AD Add Option DS Capabilities plus Analog Audio Monitoring (2 sets of 6 Channels analog inputs; 8 Channels analog audio Outputs)		$2,700.00
WFM7020BAS	Tektronix WFM7020BAS Add Basic Option Bundle (Including Support for SD, CPS, and AD) to WFM7020 Waveform Monitor		$6,900.00
WFM7020CPS	Tektronix WFM7020CPS Add Support for Composite Analog Video Monitoring; 2 Composite Analog Inputs; Passive Loophole		$2,100.00
WFM7020DL	Tektronix WFM7020DL Add support for Multiple Dual-link Video Formats (must order option WFM7020HD as well)		$4,200.00
WFM7020HD	Tektronix WFM7020HD Add Support for High definition Digital Video Monitoring		$4,200.00
WFM702UP	Tektronix WFM702UP Post-Sale Upgrade for WFM7020 Waveform Monitor (No Charge)		$0.00
WFM702UP3G	Tektronix WFM702UP 3G Add Support for 3Gbps Single Link SDI Signal Formats (MUST Order HD Option or have HD Option already installed in base unit)		$11,000.00
WFM7120 Options
Must be added at time of Main Unit Purchase! If product is required after unit is purchased Please Call
WFM71203G	Tektronix WFM7120 3G Add Support for 3Gbps Single Link SDI Signal Formats (MUST Order Option HD)		$10,000.00
WFM712062	Tektronix WFM712062 Analog Audio Breakout Cable, 6 feet, male 62-pin connector to 8 Xlr Male Output Connectors and 12 XLR Input Female Connectors		$725.00
WFM7120AD	Tektronix WFM7120AD AD Option Adds Analog Audio Monitoring (2 Sets of 6 Channel Analog Audio Inputs and 8 Channels Analog Audio Outputs) Plus 8 Channel Embedded or AES/EBU Digital Audio.		$2,700.00
WFM7120AVD	Tektronix WFM7120AVD Add support for out-of-service A/V Delay Measurement		$1,600.00
WFM7120ALY	Tektronix WFM7120ALY Add Analysis Option Bundle (Including support for SD, HD, CPS, SIM, DDE, AVD, PHY, AND DAT) To WFM7120 Advanced Waveform Monitor		$21,800.00
WFM7120BAS	Tektronix WFM7120BAS Add Basic Option Bundle (including support for SD, HD, CPS, SIM, and AD) to the WFM7120 Advanced waveform Monitor		$9,000.00
WFM7120DDE	Tektronix WFM7120DDE Add Option DD Capabilities Plus Support for Decoding and Monitoring Dolby E Audio		$7,800.00
WFM7120CPS	Tektronix WFM7120CPS Add Support for Composite Analog Video Monitoring; 2 Composite Analog Inputs; Passive Loopthrough		$2,100.00
WFM7120DAT	Tektronix WFM7120DAT Add Advanced Data Analysis Capabilities		$2,000.00
WFM7120DL	Tektronix WFM7120DL Add Support for multiple Dual-Link (must order option WFM7120HD as well)		$4,200.00
WFM7120EYE	Tektronix WFM7120EYE Add Eye pattern, Jitter Measurements, and Cable Parameters Measurements		$4,200.00
WFM7120HD	Tektronix WFM7120HD Add Support for High Definition Digital Video Monitoring		$4,200.00
WFM7120JIT	Tektronix WFM7120 JIT Add Jitter Measurements and Jitter Waveform Display Capabilities for 3Gbps Single Link Physical Interface (MUST order Option 3G and Option HD)		$10,000.00
WFM7120PER	Tektronix WFM7120PER Add Performance Option Bundle ( Includes Support for SD, HD, CPS, SIM, And DDE) To the WFM7120 Advanced Waveform Monitor		$12,400.00
WFM7120PHY	Tektronix WFM7120PHY Add Option Ey Capabilities plus Jitter Waveform and Automated Eye Measurements		$7,800.00
WFM7120SIM	Tektronix WFM7120SIM Add support for Simultaneous Input Monitoring		$2,100.00
WFM712UP	Tektronix WFM712UP Post-Sale Upgrade for WFM7120 Advanced Waveform Monitor (No Charge)		$0.00
WFM712UP3G	Tektronix WFM712UP 3G Add Support for 3Gbps Single Link SDI Signal Formats (MUST Order Option HD or have Option HD already installed in base unit)		$11,000.00
WFM712UPJIT	Tektronix WFM712UP JIT Add Jitter Measurements and Jitter Waveform Display Capabilities for 3Gbps Single Link Physical Interface (MUST Order Option 3G and Option HD or have Option 3G and Option HD already installed in base unit)		$11,000.00

Tektronix WFM6120 · WFM7020 · WFM7120 Multi-Standard, MultiFormat Waveform Monitors

Tektronix WFM6120 · WFM7020 · WFM7120
Multi-Standard, MultiFormat Waveform Monitors