Tektronix THS3024
200 MHz, 4 Channel, 5 GS/s Digital Storage Oscilloscope

Tektronix THS3024 Shown

Product Information Datasheet 1.4 MB PDF Help Tektronix Test & Measurement Promotions

• 200 MHz Bandwidth
• 4 fully Isolated and Floating Channels
• 600 VRMS CAT III rated inputs
• 10K points standard record length on all channels
• 5 GS/s Maximum sample rates
• Advanced triggering
• 21 automatic measurements
• FFT function standard on all models
• 7 Hours of continuous battery operation
• USB 2.0 device and host support
• Lightweight and portable
• Tektronix OpenChoice desktop software included
• 3 year warranty

Portable Performance for Challenging Environments

With 4 isolated channels and up to 7 hours of battery life, the lightweight Tekronix THS3000 Handheld Oscilloscope Series enables you to safely make floating or differential measurements on your bench or in the field. Now you can tackle tough environments with the performance you expect from Tektronix – safely and affordably.

Accurately Measure Your Signals
With up to 200MHz bandwidth, 4 channels, and 5 GS/s maximums ample rate, no other oscilloscope offers as much bandwidth and sample rate in a portable handheld form factor. The Tektronix THS3024 Handheld Oscilloscope Series has 10,000 points record length per channel, enabling you to capture more signal information at higher sample rates to clearly see signal details. For applications where it is important to measures low-changing signals over long time periods, the Tek THS-3024 offers Roll mode that extends the record length to 30,000 points of signal information.

Safely Make Floating and Differential Measurements
Making accurate and safe measurements on power electronics, power semiconductors, and other electronics applications can be challenging when the signal reference is floating and not referenced to earth ground. When your signal ranges from low voltage to high voltage (kV) or you must use probing techniques that can potentially create ground loops, the problem is compounded.

To enable floating measurements, the Tektronix THS 3024 is architecturally different than most other oscilloscopes. All input channels are fully isolated from the main chassis and from each other. Additionally the power adapter and USB interface are fully isolated to ensure safe measurements and eliminate the risk of unintentional grounding or accidental short circuits. When configured with the proper probes you can be assured you'll be able to make quick, safe, and accurate measurements.

Industrial power design and debug
The Tektronix THS-3024's four isolated channels allow for easy measurement of three-phase power or simultaneous capture of digital control and power signals.

Installation and maintenance
The Tektronix THS 3024 can Verify and document power system operating conditions before and after installation.

Fast Analysis of Your Device

The Tektronix THS/3024 Handheld Oscilloscope is packed with analysis tools to help you validate your device's operation and identify issues quickly. With waveform math, you can add, subtract, or multiply any of your signals to investigate instantaneous power or look at gain. Vertical and horizontal cursors allow you to look at a specific point on your waveform for accurate measurements of voltage, current, time, or frequency. With 21 automated measurements, you can make common measurements quickly and accurately. The built-in Fast Fourier Transform (FFT) function allows you to see the frequency spectrum of your signal, revealing signa linterference, cross talk, or switching noise.

Find Intermittent Faults with Trend Plot
Intermittent faults can be caused by timing errors, temperature changes, environmental influences, or simply broken wiring or connectors. The TrendPlot function helps you find those faults by plotting minimum and maximum measurement values over time. You can select up to 4 measurements and plot any combination of voltages, amps, frequency, time, and phase for any or all four inputs, all with time capture information.

Automatic Capture and Data Logging of 100 Display Screens
Capturing random or changing signal scan often be difficult. The Tektronix THS3024 greatly simplifies any type of waveform data logging by continuously capturing 100 display screens. Each screen capture can include multiple channels and math waveforms, each with its own timestamp. Data capture can also be tailored to specific events by selection of qualified trigger conditions. Play back is quick and easy with the automatic replay of all captured screens or only the screens you select.

Waveform Limit Testing
The Tektronix THS3024 can automatically monitor your signals and output Pass or Fail results by judging whether the input waveform is within predefined boundaries. Users elections can include testing one or all input channels and automatic recording of Pass or Fail data. Data can easily be reviewed using the Replay mode or stored externally to a USB memory device.

Complete Solution for Power Measurements

For performing power measurement on motor drives, power converters/inverters, and power semiconductor devices the Tektronix THS 3024 is equipped to handle most common measurements. For basic debugging, the isolated input channels can be used with a variety of voltage and current probes. Each input channel can be configured to match the probe type and attenuation ensuring correct measurements and cursor readings. Four channels allow for easy measurements of three-phase power or simultaneous capture of digital control and power signals.

Measurements on power conversion electronics usually require probes with higher voltage ratings. Tektronix offers a passive probe with insulation systems specifically designed for making floating measurements. The standard THP0301-X can measure up to 849Vp-p (300VRMS). Optional P5122 probes, when coupled with the Tektronix THS3000 Series, are suitable for making measurements on 1000V RMS devices in Category II environments, with a maximum float voltage of up to 600 VRMS relative to earth ground.