| << Tektronix Frequency Counters/Timers/Analyzers |
Tektronix MCA3027 & MCA3040 Series
Microwave/Counter/Analyzer & Integrated Power Meter
|
| |
 
Tektronix MCA3000 Shown
|
|
|
Features:
- Key Performance Specifications
- 27 GHz and 40 GHz Models
- Microwave Analyzer Channel with CW or Burst
- Two 300 MHz General-purpose Channels
- –35 dBm to +10 dBm Power Range
- 100 ps Single-shot Time Resolution
- 12 Digit/s Frequency Resolution, 14 Digit Display
- 25 ms (Auto) or Zero (Manual) Acquisition Time
- 3 mV Voltage Resolution
- Optional 1.5×10–8 Ultra High-stability Oven Time Base
- Measurement Throughput
- 250k Sample/s Data Transfer Rate to Internal Memory(Up to 750k samples stored)
- 5k Sample/s Data Transfer Rate over USB/GPIB Bus(Block mode)
- Automated Measurements: Frequency, Period, Ratio, Time
Interval, Time Interval Error, Pulse Width, Rise/Fall Time,
Phase Angle, Duty Cycle, Maximum Voltage, Minimum Voltage,
Peak-to-Peak Voltage
- Integrated Power Meter
- Multi-parameter Display
- Trend Plot Mode
- Measurement Statistics Mode
- Histogram Mode
- Allan Deviation
- Zero Dead-time Frequency/Period Measurement
- USB Device and GPIB Ports on Rear Panel for Quick PC
Connectivity
- GPIB Interface Supports Full SCPI-compatible
Programmability and offers an Emulation Mode for
Plug-and-Play Replacement in Existing ATE Systems
- External Arming Input
- 10 MHz Reference Oscillator Output
|
|
Feature-rich Tools for Precision Measurements
The Tektronix MCA3027 and MCA3040 Microwave Counter Series outperforms every microwave
counter on the market today in terms of resolution, speed, and
acquisition time. Including an integrated power meter, the MCA
Series packs many different functions into one feature-rich
instrument.
With industry-leading frequency and time resolution, the MCA
Series comes standard with internal memory and a fast data transfer
rate of 250k Samples/s to memory. In addition, the multi-parameter
display shows auxiliary measurements alongside your main measurement
to provide you with the results you need at a glance. With the
industry’s most comprehensive analysis modes, including measurement
statistics, histograms, and trend plots, you have the tools you need
to quickly and accurately analyze your signal.
Besides being an outstanding microwave counter, the Tektronix MCA3027 & MCA3040
Series also serves as a general-purpose timer/counter with two
additional 300 MHz inputs.
Industry-leading Performance for Demanding Designs
Fast high-resolution frequency or power measurements with a very
short acquisition time of 25 ms (Auto) or zero (Manual) is essential
for validating today’s complex designs. For calibration and
metrology applications, the TEK MCA-3027 & MCA-3040 Series offers very high accuracy
through a stable internal OCXO time base, low systematic time
interval A-B error, and high resolution.
Fast Throughput Reduces Test Time
The Tektronix MCA3027 & MCA3040 Microwave Counter Series offers industry-best throughput, saving
you up to 90% on your testing time compared to other microwave
timer/counters on the market. Up to 250,000 measurement results per
second can be stored in the internal memory. Alternatively, you can
transfer up to 5,000 measurement results per second in Block mode through
the GPIB or USB interface.
Power Measurements
With an integrated power
meter, the Tektronix MCA 3027 and MCA 3040 Series provides measurement of frequency and power
with a single connection at any supported frequency level. For the
first time, variations in signal power can be seen, collected, and
analyzed in the same manner as frequency, both numerically and
graphically. With 0.01 dBm at 100 ms measuring time resolution and a
wide power range from –35 dBm to +10 dBm, you have the flexibility
for a broad range of power measurement applications.
|
Analyze Your Device with the Industry’s Only Graphical Display
With the unique display of the MCA-3027 & MCA-3040 Series, you can measure multiple
parameters of the same signal from one test connection. To reveal
signal quality issues like drift, intermittent transients, and
stability, you can view the data as a real-time trend plot or a
histogram with the Tektronix MCA3027 and MCA3040 Series graphical display mode, or you can use
measurement statistics to track how signal parameters are changing
over time. A single-button Analyze mode gives you fast insight into
the behavior of your device right on the timer/counter’s display.
Multi-parameter Display
Multi-parameter Display. |
With the multi-parameter display, you can read important auxiliary
measurement values (such as Vmax, Vmin, Vp-p, and more) displayed
with your main frequency, time, period, or phase measurements. With
one glance, you can see the information you need to quickly assess
your device’s performance.
Phase Relationship
Measurement |
With up to 3 input channels, you can measure the relationship between
different signals. For example, you can measure the phase relationship
between the input and output signals of your device. You can read
other critical parameters simultaneously, such as the test frequency
of the signal and the voltage ratio (in dB), in one glance with the
multi-parameter display.
Multi-parameter Display
Trend Plot Analysis |
Depending on your test case, your signal parameters may change from
instant to instant. With the Trend Plot Analysis mode, you can
graphically plot the trend of a measured value over time.
Measurement Statistics
Measurement Statistics |
With integrated statistics processing, you can calculate the
average, standard, and Allan deviation of a measurement, as well as
track the minimum and maximum measured values, all with the push of
a button.
Histogram Plots
Histogram Plot |
To graphically see the average and standard deviation of a set of
measurements, you can use the histogram function to see the
distribution of measurement results.
Optional Modulation Domain Analysis
With the optional Tektronix TimeView software (TVA3000), the Tektronix MCA3027
& MCA3040 can become a high-performance modulation domain
analyzer. With high measurement speeds (up to 250k measurement/s) and large
memory depth (up to 3.75M points), fast frequency changes can be captured in
real time and then analyzed with TimeView. This comprehensive software tool
allows for remote instrument control, and the analysis and display of measurement
results in a choice of graphs. For example, results can be displayed as raw data,
statistical histogram, waveform graph (as if you were using an oscilloscope),
or as an FFT spectrum graph. TimeView further allows analysis of modulation
parameters like modulation depth or frequency modulation index.
|
Designed to Make Your Work Easier
The Tektronix MCA 3027/MCA 3040 Microwave Counter Series are designed with the ease of
use and familiar operation you have come to expect from Tektronix.
Intuitive Operation
Menu-oriented settings reduce the risk of mistakes. With dedicated and menu-driven
front-panel buttons, you will have fast access to frequently used functions and
parameters, reducing setup time. For example, a single-touch Analyze key toggles you between
Statistics, Trend Plot, and Histogram modes.
Autoset Function
Similar to Tektronix oscilloscopes, the front-panel Autoset button will automatically set
optimum trigger levels and hysteresis adapted to the actual signal applied.
Easy PC Connectivity
Connect to your PC with the rear-panel GPIB or USB device ports. The GPIB interface
operates in SCPI/GPIB for plug-and-play replacement in existing ATE systems or easy
integration into larger test systems. If desired, an emulation mode for existing
timer/counters is available.
Connect Your Bench for Intelligent Debug
Easily capture, save, and analyze measurement results from your Tektronix MCA 3027 and
MCA 3040 with the special Tektronix Edition of National Instruments LabVIEW
SignalExpress software. Every FCA Series timer/counter/analyzer ships with a free copy o
f the Limited Edition version of SignalExpress for basic instrument control, data logging,
and analysis. The optional Professional Edition offers over 200 built-in functions that provide
additional signal processing, advanced analysis, sweeping, limit testing, and user-defined
step capabilities.
SignalExpress supports the range of Tektronix bench instruments enabling you to connect your
entire test bench. You can then access the feature-rich tools packed into each instrument from one
intuitive software interface. This allows you to automate complex measurements requiring multiple
instruments, log data for an extended period of time, time-correlate data from multiple
instruments, and easily capture and analyze your results, all from your PC. Only Tektronix offers
a connected test bench of intelligent instruments to simplify and speed debug of your complex design.
Performance You Can Count On
In addition to industry-leading service and support, every Tektronix MCA3027 amd MCA3040 comes backed with a three-year standard warranty.
|
| |
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| MCA3027 |
Tektronix MCA3027 300MHz/27GHz Microwave/Counter Analyzer & Power Meter, Medium Timebase |
 |
$8,860.00 |
| MCA3040 |
Tektronix MCA3040 300MHz/40GHz Microwave/Counter Analyzer & Power Meter, Medium Timebase |
|
$13,000.00 |
| MCA3027 Options |
Must be added at time of Main Unit Purchase!
If product is required after unit is purchased, Please Call |
| MCA3027HS |
Tektronix MCA3027-HS High Stability Oven Oscilator Option for MCA3027 |
|
$1,110.00 |
| MCA3027US |
Tektronix MCA3027-US Ultra High Stability Oven Oscillator Option for MCA3027 |
|
$2,230.00 |
| MCA3040 Options |
Must be added at time of Main Unit Purchase!
If product is required after unit is purchased, Please Call |
| MCA3040HS |
Tektronix MCA3040-HS High Stability Oven Oscilator Option for MCA3040 |
|
$1,110.00 |
| MCA3040US |
Tektronix MCA3040-US Ultra High Stability Oven Oscillator Option for MCA30240 |
|
$2,230.00 |
| Included Accessories |
| |
- 1 - Line cord
- 1 - calibration certificate
- 1 - Quick Start User Manual
- 1 - CD-ROM w/ User Manual
- 1 - Programmer’s Guide
- 1 - Technical Specifications
- 1 - Trial version of TimeView Software
- 1 - CD-ROM w/ National Instruments LabVIEW SignalExpress Tektronix Edition, Limited
Edition Software
|
Included |
| Optional Accessories |
| ACD4000 |
Tektronix ACD4000 SOFT Case for DPO/MSO4000 and DPO3000 |
|
$245.00 |
| HCTEK4321 |
Tektronix HCTEK4321 Hard Transit Case (requires Soft Case) |
|
$780.00 |
| SIGEXPTE |
Tektronix SigExpTE NI Signal Express Tektronix Edition Software - Professional/Full Version |
|
$771.00 |
|
)
PDF Help)
)
)
)
)