<< Tektronix Accessories | << Tektronix Oscilloscope Probes | << Tektronix Differential Probes
<< Tektronix Probes & Accessories Price List
Tektronix TDP1500
1.5 GHz Differential Probe with TekVPI Interface,
Certificate of Traceable Calibration Standard
|
|
|
 
TDP1500 Differential Probe Shown
|
Features & Benefits
- Outstanding Electrical Performance
- 1.5 GHz Bandwidth – Accurate Measurements for Serial
and Digital Applications
- Excellent Common Mode Rejection – Reduces Measurement
Errors in Higher Common Environments
- Low Capacitive and Resistive Loading – Maintains
Signal Fidelity and Reduces DC Biasing Interactions
- Versatile Mechanical Performance
- Compact Probe Head Size for Probing Small Geometry
Circuit Elements
- DUT Attachment Accessories Enable Connection to
Fine-spaced SMDs
- Robust Design for Reliability
- Easy to Use
- Connects Directly to DPO7000, DPO4000, and MSO4000
Series Oscilloscopes Using TekVPI Probe Interface
- Provides Automatic Units Scaling and Readout on the
Oscilloscopes Display
- Easy Access to Probe Comp Box Controls or Oscilloscope
Probe Menu Display for Probe Status, Setup Control, and Diagnostic
Information
- Integrated Scope/Probe System
- Direct Connection to and Powered from TekVPI™
Oscilloscope Interface (Connects directly to TekVPI scopes without
the need of an external power supply, like many competitors
require)
- Single-button Oscilloscope Probe Menu Access
- Setup and Control from Probe Comp Box or Oscilloscope
User Interface
- AutoZero - Zeros Out Output Offset
- Remote GPIB/USB Probe Control Through the Oscilloscope
(Requires TEK-USB-488 Adapter for GPIB control on DPO4000 and
MSO4000)
Applications
- Design, Validation, Debugging, and Characterization of Common
High-speed Serial Bus Designs:
- I2C
- CAN/LIN
- SPI
- Serial ATA
- Ethernet (GbE)
- USB 2.0
- FireWire (1394b)
- Signal Integrity, Jitter, and Timing Analysis
- Manufacturing Engineering and Test
Differential Probes - A Better Measurement Tool
Differential active probes provide truer signal reproduction and
fidelity for high-frequency measurements. With ultra-low input capacitance
and versatile device-under-test connection capabilities, the TDP1500 and
TDP3500 Differential-ended Active probes provide excellent high-speed
electrical and mechanical performance required for today’s digital system
designs.
Specifically designed for use and direct connection to the TekVPI™
probe interface used on the DPO7000, DPO4000, and MSO4000 Series
oscilloscopes, the TDP1500 and TDP3500 Differential probes achieve
high-speed signal acquisition and measurement fidelity by solving three
traditional problems:
- DUT loading effects - Are reduced by lower input capacitance and
high input resistance
- DUT connectivity - A variety of accessories exist for attaching to
small SMDs, some come standard or recommended
- Maximizing of system (oscilloscope and probe) bandwidth - probing
solutions for all measurements for TekVPI interface oscilloscope
models up to 3.5 GHz
Specifications
- Bandwidth (Probe only): ≥1.5 GHz warranted
- Attenuation (Probe only): 1x/10x
- Rise Time (Probe only): ≤265 ps typical
- Differential Input Capacitance: ≤1 pF
- Differential Input Resistance: 200 kΩ
- Differential Input Dynamic Range: ±8.5 V (10x); ±850 mV (1x)
- CMRR: >60 dB at 1 MHz; >25 dB at 1 GHz
- Input Offset Range: ±7 V (10x or 1x)
- Operation Voltage Input Range (Common Mode Input Range):
±7 V (1x);±7 V (10x)
- Noise: <50 nV/root Hz
- Max Input Voltage (Nondestruct): ±25 V (DC + pk AC)
- Propagation Delay: 5.4 ns typical
- Cable Length: 48 inches
- Weight (Probe only): 5.4 oz
- Power Requirements: TDP1500 and TDP3500 are powered directly by
the DPO7000, DPO4000, and MSO4000 Series Oscilloscopes with TekVPI
probe interface.
- Recommended Oscilloscopes: DPO7000, DPO4000, MSO4000 Series
Oscilloscopes with TekVPI probe interface.
- Minimum System Requirements / Instrument Compatibility: TDP1500 is
fully supported on the DPO4000 and MSO4000. TDP1500 functions properly
with DPO7000 Series firmware version 4.0.0 and above, but does not
provide range control on the oscilloscope menu.
|
|
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| TDP1500 |
Tektronix TDP1500 Probe, Differential with TEKVPI Interface, 1.5 GHz Bandwidth (w/ Certificate of Traceable Calibration) |
 |
Sale $4,842.00
(Reg. $5,380.00) |
| Included Accessories |
| |
- (1) 016-1952-xx Pouch, Nylon Carrying Case with
Inserts
- (1) 020-2866-xx (English w/ Standard) Documentation
Kit TDP1500, Includes: Printed User Manual (English
071-2209-xx; Japanese 071-2210-xx; Simplified Chinese
071-2211-xx) and a CD containing (Technical Reference
Manual PDF English 071-2296-xx)
Certificate of
Traceability
(1) Accessory Kit TDP1500:
- (1) 006-7164-xx Plastic Accessory Box
- (8) 016-1891-xx Straight Pins
- (5) 016-1780-xx Longhorn VIA Adapter
- (1) 196-3504-xx 1-inch Solder Down
- (1) 196-3505-xx 3-inch Solder Down
- (2) 196-3434-xx Y-Lead Adapter
- (3) 206-0569-xx Micro CKT Test Tip
- (2) 016-1781-xx Tip Saver
- (2) 196-3437-xx 3-inch Ground Lead
- (10) 016-1315-xx Marker Bands (2 each of 5
colors)
- (1) 001-1412-xx Accessory Performance Summary
and Reorder Sheet
|
Included |
| Recommended Accessories |
| 679-4094-xx |
Tektronix 679-4094-xx BNC to Probe Tip Adapter |
Please Call |
| 016-1785-xx |
Tektronix 016-1785-xx TwinFoot™ Adapter |
Please Call |
| 016-1786-xx |
Tektronix 016-1786-xx TwinTip™ Adapter |
Please Call |
| 016-1890-xx |
Tektronix
016-1890-xx VariTip™ Adapter |
Please Call |
| 013-0309-xx |
Tektronix 013-0309-xx IC
Micro Grabber
|
Please Call |
| SMK4 |
Tektronix SMK4 Adapter Micro-Grabbers; Probe Attachment for Small Geometry Leads, 4 each |
|
$146.00 |
| 679-5027-xx |
Tektronix 679-5027-xx IEEE 1394 Adapter |
Please Call |
| 016-1783-xx |
Tektronix 016-1783-xx Short Ground Contact |
Please Call |
| 016-1782-xx |
Tektronix 016-1782-xx Spring-loaded Ground |
Please Call |
|
)
PDF
Help