<< Tektronix Accessories
| << Tektronix Oscilloscope Probes
| << Tektronix Differential Probes |
<< Tektronix High Voltage Probes
<< Tektronix Probes & Accessories Price List
Tektronix TDP0500
500 MHz High Voltage Differential Probe with TekVPI
Interface
|
 
TDP0500 High Voltage Probe Shown
|
Features & Benefits
- Outstanding Electrical Performance
- 1 GHz and 500 MHz Probe Bandwidth
- <1 pF Differential Input Capacitance
- 1 MΩ Differential Input Resistance
- ±42 V (DC + pk AC) Differential Input Voltage
- >18 dB CMRR (at 250 MHz 50x attenuation)
- Selectable Bandwidth-limiting Filters
- DC Reject
- Versatile DUT Connectivity
- Small Compact Probe Head for Probing Small
Geometry Circuit Elements
- Straight Pin, Square Pin, Solder Down, Variable
Pitch Standard Accessories
- Robust Design for Reliability
- Easy to Use
- Provides Automatic Units Scaling and Readout on
the Oscilloscope Display
- Connect Directly to the DPO7000, DPO4000, and
MSO4000 Series Oscilloscopes Using TekVPI™ Probe Interface
(No additional power adapters required)
- Easy Access to Scope-displayed Probe Menu for
Probe Setup Control and Operating Status Information
- AutoZero – Zeros Out Output Offset
Applications
- High-speed Switch Mode Power Supply Design
- CAN/LIN Bus Design
- High-speed Digital Design
- Digital Design and Characterization
- Manufacturing Engineering Test
- Research and Development
Tektronix TDP1000, TDP0500, P6251, and P6250 High-voltage
Differential Probes provide excellent high-speed electrical and
mechanical performance required for today’s Switch Mode Power Supply
(SMPS), CAN/LIN Bus, and high-speed digital system designs.
Specifically designed for use with and direct connection to Tektronix
oscilloscopes with either the TekVPI™ probe interface, or TekProbe BNC
Interface. The TDP1000, TDP0500, P6251, and P6250 High-voltage
Differential Probes achieve high-speed signal acquisition and
measurement fidelity by solving three traditional measurement
challenges:
- Outstanding Electrical Performance
- Versatile Device-Under-Test Connectivity
- Ease of Use
Specifications
|
Characteristic |
Description |
|
Bandwidth (Probe only) |
500 MHz |
|
Attenuation |
5x, 50x |
|
Rise Time (Probe only) |
<700 ps |
|
Differential Input Capacitance |
<1 pF |
|
Differential Input Resistance |
1 MΩ |
|
CMRR |
>55 dB at 30 kHz, >50 dB at 1 MHz, >18 dB at 250 MHz (warranted
at 50x attenuation) |
|
Sensitivity/Noise Level |
2 mVRMS (5x attenuation), 1 mVRMS (50x
attenuation) referred to the probe output, 10 mVRMS (5x
attenuation), 50 mVRMS (50x attenuation) referred to the
probe input |
|
Differential Mode Input Voltage |
±42 V (DC + pk AC); 30 VRMS |
|
Common Mode Input Voltage |
±35 V (DC + pk AC); 25 VRMS |
|
Input Offset Range |
±42 V (5x or 50x attenuation) |
|
Max Input Voltage (Nondestruct) |
±100 V (DC + pk AC) |
|
Selectable Bandwidth Filter Limits |
100 Hz, 10 kHz, 1 MHz, Full |
|
DC Reject |
0.4 Hz (5x), 4 Hz (50x) |
|
Gain Accuracy at DC |
±2% |
|
Propagation Delay |
6.5 ns |
|
Scope Interface |
TekVPI™ Probe Interface |
| Power Requirements |
Are powered directly by the DPO7000,
DPO4000, and
MSO4000 Series
oscilloscopes using the TekVPI interface. |
| Standard Warranty |
1-year parts and labor |
| Recommended Oscilloscopes |
DPO7000,
DPO4000, and
MSO4000 Series, Interface: TekVPI probe |
| Required Oscilloscope Firmware |
DPO7000 Series: Version 3.0.2 or later firmware;
DPO4000/MSO4000 Series: Version 2.06 or later firmware |
|
|
|
| Ordering Information |
| Model |
Description |
Buy Online |
Price |
| TDP0500 |
Tektronix TDP0500 Differential High Voltage Probe with TEKVPI Interface, 42V, 500MHZ - Certificate of traceable calibration standard - Special Offer Available: Purchase this item with a Qualifying Oscilloscope and Save! Act Now - Offer Ends 3/31/2010 |
 |
$3,090.00 |
| Included Accessories |
| |
- (1) Certificate of Traceable Calibration
- (2) 196-3434-xx Y-Lead Set
- (1) 196-3504-xx Solder-down Lead Set, 1 inch
- (1) 196-3505-xx Solder-down Lead Set, 3 inch
- (3) 206-0569-xx Micro CKT Test Tip
- (2) 016-1781-xx Tip Savers
- (2) 016-1780-xx Longhorn Adapters
- (8) 016-1891-xx Straight-pin Probe Tips
- (2) 196-3437-xx 3-inch Ground Leads
- (10) 016-1315-xx Color-coding Bands; 2 each of 5
colors
- (1) 016-1952-xx Nylon Carrying Case
- (1) 063-4110-xx CD with Technical Reference Manual
and Quick Start Users Guides
- (1) Quick Start Users Guide
- (1) 063-3941-xx Documentation Kit CD, Includes:
Quick Start Users Guide (English, Japanese, and
Simplified Chinese versions); Technical Reference Manual
|
Included |
| Recommended Accessories |
| 067-1734-xx |
Tektronix 067-1734-xx BNC to Probe Tip Adapter |
Please Call |
| 016-1782-xx |
Tektronix
016-1782-xx Spring Loaded Grounds (Package of 6) |
Please Call |
| 016-1785-xx |
Tektronix 016-1785-xx Twin
Foot Adapter (Package of 4) |
Please Call |
| 016-1786-xx |
Tektronix 016-1786-xx Twin Tip Adapter (Package of
4) |
Please Call |
| SMK4 |
Tektronix SMK4 Adapter Micro-Grabbers; Probe Attachment for Small Geometry Leads, 4 each |
|
$129.00 |
| 1103 |
Tektronix 1103 TEKPROBE Probe Power Supply |
|
$1,970.00 |
|
)
PDF
Help
